lkml.org 
[lkml]   [2021]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V3] mtd: rawnand: qcom: update last code word register
On 2021-01-29 03:41, Miquel Raynal wrote:
> Hello,
>
> mdalam@codeaurora.org wrote on Fri, 29 Jan 2021 03:18:46 +0530:
>
>> On 2021-01-14 21:23, Miquel Raynal wrote:
>> > Hello,
>> >
>> > Md Sadre Alam <mdalam@codeaurora.org> wrote on Sun, 10 Jan 2021
>> > 09:31:45 +0530:
>> >
>> >> From QPIC version 2.0 onwards new register got added to
>> >
>> > a
>> >
>> >> read last codeword. This change will update the same.
>> >
>> > the? ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> > Please reword this sentence.
>>
>> Fixed this in V4 patch.
>> >
>> >> For first three code word READ_LOCATION_n register will be
>> >> use.For last code word READ_LOCATION_LAST_CW_n register will be
>> >> use.
>> >
>> > "For the first three codewords, READ_LOCATION_n registers will be used.
>> > The last codeword register will be accessed through
>> > READ_LOCATION_LAST_CW_n."
>> >
>> > Also, please specify what these registers store.
>>
>> The location register is mainly use for reading controller
>> buffer via BAM mode. The bits of the register
>> "NAND_READ_LOCATION_LAST_CW_n, n=0..4"
>> as follow:
>
> Perhaps what I do not understand is: when is this "last_cw" register
> more useful than the previous set?

From QPIC Version 2.0 onwards it is mandatory to use
"NAND_READ_LOCATION_LAST_CW_n, n=0..4"
register to extract last code word data from controller buffer. Using
register "NAND_READ_LOCATION_n, n=0..4"
we can extract all code words except last code word.
>
>> [9:0]-bits : (OFFSET) This bit defines the offset from the buffer
>> base address to be picked up for DMA.
>> [25:16]-bits: (SIZE) This bit of every register will define the
>> size of the chunk for DMA.
>> 31-bit : (LAST) If this bit is set, the controller takes the
>> particular register to specify the last chunk
>> of data made available for DMA. This chunk is
>> part of the internal buffer of the controller.
>>
>> >
>
> Thanks,
> Miquèl

\
 
 \ /
  Last update: 2021-01-29 06:08    [W:0.043 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site