lkml.org 
[lkml]   [2021]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 2/3] Input: atmel_mxt_ts - support wakeup methods
On Fri, Jan 22, 2021 at 9:07 PM Dmitry Osipenko <digetx@gmail.com> wrote:

> According to datasheets, chips like mXT1386 have a WAKE line, it is used
> to wake the chip up from deep sleep mode before communicating with it via
> the I2C-compatible interface.
>
> If the WAKE line is connected to a GPIO line, the line must be asserted
> 25 ms before the host attempts to communicate with the controller. If the
> WAKE line is connected to the SCL pin, the controller will send a NACK on
> the first attempt to address it, the host must then retry 25 ms later.
>
> Implement the wake-up methods in the driver. Touchscreen now works
> properly on devices like Acer A500 tablet, fixing problems like this:
>
> atmel_mxt_ts 0-004c: __mxt_read_reg: i2c transfer failed (-121)
> atmel_mxt_ts 0-004c: mxt_bootloader_read: i2c recv failed (-121)
> atmel_mxt_ts 0-004c: Trying alternate bootloader address
> atmel_mxt_ts 0-004c: mxt_bootloader_read: i2c recv failed (-121)
> atmel_mxt_ts: probe of 0-004c failed with error -121
>
> Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

\
 
 \ /
  Last update: 2021-01-24 00:02    [W:0.076 / U:3.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site