[lkml]   [2021]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/2] add support for GPIO based counter
changes v3:
- convert counter to atomic_t

changes v2:
- add commas
- avoid possible unhandled interrupts in the enable path
- do not use of_ specific gpio functions

Add support for GPIO based pulse counter. For now it can only count
pulses. With counter char device support, we will be able to attach
timestamps and measure actual pulse frequency.

Never the less, it is better to mainline this driver now (before chardev
patches go mainline), to provide developers additional use case for the counter
framework with chardev support.

Oleksij Rempel (2):
dt-bindings: counter: add gpio-pulse-counter binding
counter: add GPIO based pulse counters

.../bindings/counter/gpio-pulse-counter.yaml | 39 +++
drivers/counter/Kconfig | 9 +
drivers/counter/Makefile | 1 +
drivers/counter/gpio-pulse-cnt.c | 244 ++++++++++++++++++
4 files changed, 293 insertions(+)
create mode 100644 Documentation/devicetree/bindings/counter/gpio-pulse-counter.yaml
create mode 100644 drivers/counter/gpio-pulse-cnt.c


 \ /
  Last update: 2021-01-22 12:33    [W:0.121 / U:0.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site