lkml.org 
[lkml]   [2021]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 07/22] netxen_nic: fix MSI/MSI-x interrupts
Date
From: Manish Chopra <manishc@marvell.com>

[ Upstream commit a2bc221b972db91e4be1970e776e98f16aa87904 ]

For all PCI functions on the netxen_nic adapter, interrupt
mode (INTx or MSI) configuration is dependent on what has
been configured by the PCI function zero in the shared
interrupt register, as these adapters do not support mixed
mode interrupts among the functions of a given adapter.

Logic for setting MSI/MSI-x interrupt mode in the shared interrupt
register based on PCI function id zero check is not appropriate for
all family of netxen adapters, as for some of the netxen family
adapters PCI function zero is not really meant to be probed/loaded
in the host but rather just act as a management function on the device,
which caused all the other PCI functions on the adapter to always use
legacy interrupt (INTx) mode instead of choosing MSI/MSI-x interrupt mode.

This patch replaces that check with port number so that for all
type of adapters driver attempts for MSI/MSI-x interrupt modes.

Fixes: b37eb210c076 ("netxen_nic: Avoid mixed mode interrupts")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20210107101520.6735-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)

--- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
+++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
@@ -580,11 +580,6 @@ static const struct net_device_ops netxe
.ndo_set_features = netxen_set_features,
};

-static inline bool netxen_function_zero(struct pci_dev *pdev)
-{
- return (PCI_FUNC(pdev->devfn) == 0) ? true : false;
-}
-
static inline void netxen_set_interrupt_mode(struct netxen_adapter *adapter,
u32 mode)
{
@@ -680,7 +675,7 @@ static int netxen_setup_intr(struct netx
netxen_initialize_interrupt_registers(adapter);
netxen_set_msix_bit(pdev, 0);

- if (netxen_function_zero(pdev)) {
+ if (adapter->portnum == 0) {
if (!netxen_setup_msi_interrupts(adapter, num_msix))
netxen_set_interrupt_mode(adapter, NETXEN_MSI_MODE);
else

\
 
 \ /
  Last update: 2021-01-22 19:53    [W:0.400 / U:1.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site