lkml.org 
[lkml]   [2021]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] EDAC/AMD64: Update scrub register addresses for newer models
Date
On 16/01/2021 17:33, Yazen Ghannam wrote:
> From: Yazen Ghannam <yazen.ghannam@amd.com>
>
> The Family 17h scrubber registers moved to different offset starting
> with Model 30h. The new register offsets are used for all currently
> available models since then.
>
> Use the new register addresses as the defaults.
>
> Set the proper scrub register addresses during module init for older
> models.

So I tested the patch on my machine (AMD Ryzen 9 3900XT on ASRock B550 Extreme4 motherboard, Linux 5.10.7).

The /sys/devices/system/edac/mc/mc0/sdram_scrub_rate value seems to be stuck at 12284069 right after the boot, and does not change.
Writes to the file do not report any errors.

dmesg:

[    0.549451] EDAC MC: Ver: 3.0.0
[    0.817576] EDAC amd64: F17h_M70h detected (node 0).
[    0.818159] EDAC amd64: Node 0: DRAM ECC enabled.
[    0.818717] EDAC amd64: MCT channel count: 2
[    0.819324] EDAC MC0: Giving out device to module amd64_edac controller F17h_M70h: DEV 0000:00:18.3 (INTERRUPT)
[    0.819909] EDAC MC: UMC0 chip selects:
[    0.819910] EDAC amd64: MC: 0: 16384MB 1: 16384MB
[    0.820488] EDAC amd64: MC: 2: 16384MB 3: 16384MB
[    0.821067] EDAC MC: UMC1 chip selects:
[    0.821067] EDAC amd64: MC: 0: 16384MB 1: 16384MB
[    0.821630] EDAC amd64: MC: 2: 16384MB 3: 16384MB
[    0.822187] EDAC amd64: using x16 syndromes.
[    0.822739] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.0 (POLLED)
[    0.823314] AMD64 EDAC driver v3.5.0


\
 
 \ /
  Last update: 2021-01-18 02:41    [W:0.167 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site