lkml.org 
[lkml]   [2021]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1] drm/panel: simple: add SGD GKTW70SDAD1SD
On Sat, Jan 16, 2021 at 9:49 AM Oliver Graute <oliver.graute@gmail.com> wrote:

> > power-supply = <&reg_touch_3v3> is not correct, as the reg_touch_3v3
> > does not power the LCD.
>
> yes, but how is the LCD correctly powered then?

J4 is powered by VCC_5V and VCC_3V#.

> [ 7.795980] pwm-backlight backlight: supply power not found, using dummy regulator
> [ 7.804436] OF: /backlight: #pwm-cells = 3 found -1
> [ 7.806563] of_pwm_get(): can't parse "pwms" property
> [ 7.812026] pwm-backlight backlight: unable to request PWM
> [ 7.822929] pwm-backlight: probe of backlight failed with error -22

You need to fix this.

> [ 7.876831] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
> [ 7.884231] imx-sdma 20ec000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx6q.bin
> [ 7.916013] printk: console [ttymxc0] enabled
> [ 7.916013] printk: console [ttymxc0] enabled
> [ 7.922351] printk: bootconsole [ec_imx6q0] disabled
> [ 7.922351] printk: bootconsole [ec_imx6q0] disabled
> [ 7.952397] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 68, base_baud = 5000000) is a IMX
> [ 7.970794] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 69, base_baud = 5000000) is a IMX
> [ 8.033015] ------------[ cut here ]------------
> [ 8.037826] WARNING: CPU: 0 PID: 1 at ../drivers/gpu/drm/panel/panel-simple.c:577 panel_simple_probe+0x5dc/0x6b8

And this too

> [ 8.846104] imx6ul-pinctrl 20e0000.pinctrl: pin MX6UL_PAD_NAND_CE0_B already requested by regulator-gpio; cannot claim for 1806000.nand-controller
> [ 8.859641] imx6ul-pinctrl 20e0000.pinctrl: pin-107 (1806000.nand-controller) status -22
> [ 8.867851] imx6ul-pinctrl 20e0000.pinctrl: could not request pin 107 (MX6UL_PAD_NAND_CE0_B) from group gpminandgrp on device 20e0000.pinctrl
> [ 8.880930] gpmi-nand 1806000.nand-controller: Error applying setting, reverse things back
> [ 8.889726] gpmi-nand: probe of 1806000.nand-controller failed with error -22

And this pin conflict too.

\
 
 \ /
  Last update: 2021-01-16 18:17    [W:0.144 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site