lkml.org 
[lkml]   [2021]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 045/103] net/mlx5e: ethtool, Fix restriction of autoneg with 56G
Date
From: Aya Levin <ayal@nvidia.com>

[ Upstream commit b1c0aca3d3ddeebeec57ada9c2df9ed647939249 ]

Prior to this patch, configuring speed to 50G with autoneg off over
devices supporting 50G per lane failed.
Support for 50G per lane introduced a new set of link-modes, on which
driver always performed a speed validation as if only legacy link-modes
were configured. Fix driver speed validation to force setting autoneg
over 56G only if in legacy link-mode.

Fixes: 3d7cadae51f1 ("net/mlx5e: ethtool, Fix analysis of speed setting")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 24 ++++++++++++++-----
1 file changed, 18 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1007,6 +1007,22 @@ static int mlx5e_get_link_ksettings(stru
return mlx5e_ethtool_get_link_ksettings(priv, link_ksettings);
}

+static int mlx5e_speed_validate(struct net_device *netdev, bool ext,
+ const unsigned long link_modes, u8 autoneg)
+{
+ /* Extended link-mode has no speed limitations. */
+ if (ext)
+ return 0;
+
+ if ((link_modes & MLX5E_PROT_MASK(MLX5E_56GBASE_R4)) &&
+ autoneg != AUTONEG_ENABLE) {
+ netdev_err(netdev, "%s: 56G link speed requires autoneg enabled\n",
+ __func__);
+ return -EINVAL;
+ }
+ return 0;
+}
+
static u32 mlx5e_ethtool2ptys_adver_link(const unsigned long *link_modes)
{
u32 i, ptys_modes = 0;
@@ -1100,13 +1116,9 @@ int mlx5e_ethtool_set_link_ksettings(str
link_modes = autoneg == AUTONEG_ENABLE ? ethtool2ptys_adver_func(adver) :
mlx5e_port_speed2linkmodes(mdev, speed, !ext);

- if ((link_modes & MLX5E_PROT_MASK(MLX5E_56GBASE_R4)) &&
- autoneg != AUTONEG_ENABLE) {
- netdev_err(priv->netdev, "%s: 56G link speed requires autoneg enabled\n",
- __func__);
- err = -EINVAL;
+ err = mlx5e_speed_validate(priv->netdev, ext, link_modes, autoneg);
+ if (err)
goto out;
- }

link_modes = link_modes & eproto.cap;
if (!link_modes) {

\
 
 \ /
  Last update: 2021-01-15 14:11    [W:0.314 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site