lkml.org 
[lkml]   [2021]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 36/62] can: tcan4x5x: fix bittiming const, use common bittiming from m_can driver
Date
From: Marc Kleine-Budde <mkl@pengutronix.de>

commit aee2b3ccc8a63d1cd7da6a8a153d1f3712d40826 upstream.

According to the TCAN4550 datasheet "SLLSF91 - DECEMBER 2018" the tcan4x5x has
the same bittiming constants as a m_can revision 3.2.x/3.3.0.

The tcan4x5x chip I'm using identifies itself as m_can revision 3.2.1, so
remove the tcan4x5x specific bittiming values and rely on the values in the
m_can driver, which are selected according to core revision.

Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Cc: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20201215103238.524029-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/net/can/m_can/tcan4x5x.c | 26 --------------------------
1 file changed, 26 deletions(-)

--- a/drivers/net/can/m_can/tcan4x5x.c
+++ b/drivers/net/can/m_can/tcan4x5x.c
@@ -126,30 +126,6 @@ struct tcan4x5x_priv {
int reg_offset;
};

-static struct can_bittiming_const tcan4x5x_bittiming_const = {
- .name = DEVICE_NAME,
- .tseg1_min = 2,
- .tseg1_max = 31,
- .tseg2_min = 2,
- .tseg2_max = 16,
- .sjw_max = 16,
- .brp_min = 1,
- .brp_max = 32,
- .brp_inc = 1,
-};
-
-static struct can_bittiming_const tcan4x5x_data_bittiming_const = {
- .name = DEVICE_NAME,
- .tseg1_min = 1,
- .tseg1_max = 32,
- .tseg2_min = 1,
- .tseg2_max = 16,
- .sjw_max = 16,
- .brp_min = 1,
- .brp_max = 32,
- .brp_inc = 1,
-};
-
static void tcan4x5x_check_wake(struct tcan4x5x_priv *priv)
{
int wake_state = 0;
@@ -449,8 +425,6 @@ static int tcan4x5x_can_probe(struct spi
mcan_class->dev = &spi->dev;
mcan_class->ops = &tcan4x5x_ops;
mcan_class->is_peripheral = true;
- mcan_class->bit_timing = &tcan4x5x_bittiming_const;
- mcan_class->data_timing = &tcan4x5x_data_bittiming_const;
mcan_class->net->irq = spi->irq;

spi_set_drvdata(spi, priv);

\
 
 \ /
  Last update: 2021-01-15 14:11    [W:0.384 / U:1.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site