[lkml]   [2021]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 5.10 052/103] ARM: OMAP2+: omap_device: fix idling of devices during probe
From: Andreas Kemnade <>

commit ec76c2eea903947202098090bbe07a739b5246e9 upstream.

On the GTA04A5 od->_driver_status was not set to BUS_NOTIFY_BIND_DRIVER
during probe of the second mmc used for wifi. Therefore
omap_device_late_idle idled the device during probing causing oopses when
accessing the registers.

It was not set because od->_state was set to OMAP_DEVICE_STATE_IDLE
in the notifier callback. Therefore set od->_driver_status also in that

This came apparent after commit 21b2cec61c04 ("mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4") causing this

omap_hsmmc 480b4000.mmc: omap_device_late_idle: enabled but no driver. Idling
8<--- cut here ---
Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0b402c
(omap_hsmmc_set_bus_width) from [<c07996bc>] (omap_hsmmc_set_ios+0x11c/0x258)
(omap_hsmmc_set_ios) from [<c077b2b0>] (mmc_power_up.part.8+0x3c/0xd0)
(mmc_power_up.part.8) from [<c077c14c>] (mmc_start_host+0x88/0x9c)
(mmc_start_host) from [<c077d284>] (mmc_add_host+0x58/0x84)
(mmc_add_host) from [<c0799190>] (omap_hsmmc_probe+0x5fc/0x8c0)
(omap_hsmmc_probe) from [<c0666728>] (platform_drv_probe+0x48/0x98)
(platform_drv_probe) from [<c066457c>] (really_probe+0x1dc/0x3b4)

Fixes: 04abaf07f6d5 ("ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer")
Fixes: 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Acked-by: Ulf Hansson <>
Signed-off-by: Andreas Kemnade <>
[ left out extra parens, trimmed description stack trace]
Signed-off-by: Tony Lindgren <>
Signed-off-by: Greg Kroah-Hartman <>

arch/arm/mach-omap2/omap_device.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -230,10 +230,12 @@ static int _omap_device_notifier_call(st
od = to_omap_device(pdev);
- if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED) &&
- pm_runtime_status_suspended(dev)) {
+ if (od) {
od->_driver_status = BUS_NOTIFY_BIND_DRIVER;
- pm_runtime_set_active(dev);
+ if (od->_state == OMAP_DEVICE_STATE_ENABLED &&
+ pm_runtime_status_suspended(dev)) {
+ pm_runtime_set_active(dev);
+ }

 \ /
  Last update: 2021-01-15 13:41    [W:0.484 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site