lkml.org 
[lkml]   [2021]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
Date
Checking at both msm8909-pm8916.dtsi and msm8916.dtsi from downstream
it is indicated that "batt_id" channel has to be scaled with the default
function:

chan@31 {
label = "batt_id";
reg = <0x31>;
qcom,decimation = <0>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0xb>;
qcom,fast-avg-setup = <0>;
};

Change LR_MUX2_BAT_ID scaling accordingly.

Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
---
drivers/iio/adc/qcom-spmi-vadc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/qcom-spmi-vadc.c b/drivers/iio/adc/qcom-spmi-vadc.c
index b0388f8a69f4..7e7d408452ec 100644
--- a/drivers/iio/adc/qcom-spmi-vadc.c
+++ b/drivers/iio/adc/qcom-spmi-vadc.c
@@ -598,7 +598,7 @@ static const struct vadc_channels vadc_chans[] = {
VADC_CHAN_NO_SCALE(P_MUX16_1_3, 1)

VADC_CHAN_NO_SCALE(LR_MUX1_BAT_THERM, 0)
- VADC_CHAN_NO_SCALE(LR_MUX2_BAT_ID, 0)
+ VADC_CHAN_VOLT(LR_MUX2_BAT_ID, 0, SCALE_DEFAULT)
VADC_CHAN_NO_SCALE(LR_MUX3_XO_THERM, 0)
VADC_CHAN_NO_SCALE(LR_MUX4_AMUX_THM1, 0)
VADC_CHAN_NO_SCALE(LR_MUX5_AMUX_THM2, 0)
--
2.17.1
\
 
 \ /
  Last update: 2021-01-13 16:21    [W:0.118 / U:1.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site