lkml.org 
[lkml]   [2021]   [Jan]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v6 2/8] regulator: dt-bindings: Document max8997-pmic nodes
On Wed, Dec 30, 2020 at 08:52:07PM +0000, Timon Baetz wrote:
> Add maxim,max8997-battery and maxim,max8997-muic optional nodes.
>
> Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> v6: No change.
> v5: No change.
> v4: Make extcon and charger-supply optional.
> v3: Reorder patch, no change.
> v2: Add patch.
>
> .../bindings/regulator/max8997-regulator.txt | 12 ++++++++++++
> 1 file changed, 12 insertions(+)

This exceeds my threshold of changes for please convert this to schema
first. However, I agree with what Mark has said already, so maybe some
of this isn't needed.

>
> diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
> index 6fe825b8ac1b..faaf2bbf0272 100644
> --- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
> +++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
> @@ -53,6 +53,18 @@ Additional properties required if either of the optional properties are used:
> - max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used
> for dvs. The format of the gpio specifier depends in the gpio controller.
>
> +Optional nodes:
> +- charger: Node for configuring the charger driver.
> + Required properties:
> + - compatible: "maxim,max8997-battery"
> + Optional properties:
> + - extcon: extcon specifier for charging events

Don't use 'extcon' for new bindings. Define a connector node. USB I
suppose?

> + - charger-supply: regulator node for charging current
> +
> +- muic: Node used only by extcon consumers.
> + Required properties:
> + - compatible: "maxim,max8997-muic"
> +
> Regulators: The regulators of max8997 that have to be instantiated should be
> included in a sub-node named 'regulators'. Regulator nodes included in this
> sub-node should be of the format as listed below.
> --
> 2.25.1
>
>

\
 
 \ /
  Last update: 2021-01-11 22:51    [W:0.156 / U:4.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site