lkml.org 
[lkml]   [2021]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/4] arm64: dts: imx8mq-librem5: add pinctrl for the touchscreen description
On Tue, Dec 22, 2020 at 04:13:45PM +0100, Martin Kepplinger wrote:
> In order for the touchscreen interrupt line to work, describe it properly.
> Otherwise it can work if defaults are ok, but we cannot be sure.
>
> Fixes: 8f0216b006e5 ("arm64: dts: Add a device tree for the Librem 5 phone")
> Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> ---
> arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> index 55268fc0622e..a60df09d90f7 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> @@ -459,6 +459,13 @@
> >;
> };
>
> + pinctrl_touch: touchgrp {
> + fsl,pins = <
> + /* TP_INT */
> + MX8MQ_IOMUXC_ENET_RD1_GPIO1_IO27 0x80

Miss indentation for these two lines.

I fixed it up and applied the series.

Shawn

> + >;
> + };
> +
> pinctrl_typec: typecgrp {
> fsl,pins = <
> /* TYPEC_MUX_EN */
> @@ -880,6 +887,8 @@
> touchscreen@38 {
> compatible = "edt,edt-ft5506";
> reg = <0x38>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_touch>;
> interrupt-parent = <&gpio1>;
> interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
> touchscreen-size-x = <720>;
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2021-01-11 01:31    [W:0.093 / U:0.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site