lkml.org 
[lkml]   [2021]   [Jan]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: [PATCH 4/7] dt-bindings: regulator: qcom-labibb: Document soft start properties
    Date
    On Sat, 09 Jan 2021 14:29:18 +0100, AngeloGioacchino Del Regno wrote:
    > Document properties to configure soft start and discharge resistor
    > for LAB and IBB respectively.
    >
    > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
    > ---
    > .../bindings/regulator/qcom-labibb-regulator.yaml | 8 ++++++++
    > 1 file changed, 8 insertions(+)
    >

    My bot found errors running 'make dt_binding_check' on your patch:

    yamllint warnings/errors:

    dtschema/dtc warnings/errors:
    /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml: properties:ibb:properties:qcom,discharge-resistor-kohms: 'oneOf' conditional failed, one must be fixed:
    'type' is a required property
    Additional properties are not allowed ('default', 'enum' were unexpected)
    Additional properties are not allowed ('default' was unexpected)
    /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml: properties:ibb:properties:qcom,discharge-resistor-kohms: 'oneOf' conditional failed, one must be fixed:
    '$ref' is a required property
    'allOf' is a required property
    300 is not of type 'string'
    64 is not of type 'string'
    32 is not of type 'string'
    16 is not of type 'string'
    /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml: ignoring, error in schema: properties: ibb: properties: qcom,discharge-resistor-kohms
    warning: no schema found in file: ./Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml

    See https://patchwork.ozlabs.org/patch/1424112

    This check can fail if there are any dependencies. The base for a patch
    series is generally the most recent rc1.

    If you already ran 'make dt_binding_check' and didn't see the above
    error(s), then make sure 'yamllint' is installed and dt-schema is up to
    date:

    pip3 install dtschema --upgrade

    Please check and re-submit.

    \
     
     \ /
      Last update: 2021-01-10 18:22    [W:2.618 / U:0.884 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site