lkml.org 
[lkml]   [2020]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 01/10] dt-bindings: watchdog: sp-805: Convert to Json-schema
On Fri, Aug 28, 2020 at 7:06 AM Andre Przywara <andre.przywara@arm.com> wrote:
>
> Convert the ARM SP-805 watchdog IP DT binding over to Json-schema.
>
> A straight-forward conversion, but the requirement for providing two
> clocks got strengthened from "should" to "must".
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
> .../bindings/watchdog/arm,sp805.txt | 32 --------
> .../bindings/watchdog/arm,sp805.yaml | 75 +++++++++++++++++++
> 2 files changed, 75 insertions(+), 32 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.txt
> create mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
>
> diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt b/Documentation/devicetree/bindings/watchdog/arm,sp805.txt
> deleted file mode 100644
> index bee6f1f0e41b..000000000000
> --- a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -ARM AMBA Primecell SP805 Watchdog
> -
> -SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that
> -can be used to identify the peripheral type, vendor, and revision.
> -This value can be used for driver matching.
> -
> -As SP805 WDT is a primecell IP, it follows the base bindings specified in
> -'arm/primecell.txt'
> -
> -Required properties:
> -- compatible: Should be "arm,sp805" & "arm,primecell"
> -- reg: Should contain location and length for watchdog timer register
> -- clocks: Clocks driving the watchdog timer hardware. This list should be
> - 2 clocks. With 2 clocks, the order is wdog_clk, apb_pclk
> - wdog_clk can be equal to or be a sub-multiple of the apb_pclk
> - frequency
> -- clock-names: Shall be "wdog_clk" for first clock and "apb_pclk" for the
> - second one
> -
> -Optional properties:
> -- interrupts: Should specify WDT interrupt number
> -- timeout-sec: Should specify default WDT timeout in seconds. If unset, the
> - default timeout is determined by the driver
> -
> -Example:
> - watchdog@66090000 {
> - compatible = "arm,sp805", "arm,primecell";
> - reg = <0x66090000 0x1000>;
> - interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&wdt_clk>, <&apb_pclk>;
> - clock-names = "wdog_clk", "apb_pclk";
> - };
> diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
> new file mode 100644
> index 000000000000..980e155d3387
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/watchdog/arm,sp805.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ARM AMBA Primecell SP805 Watchdog
> +
> +maintainers:
> + - Viresh Kumar <vireshk@kernel.org>
> +
> +description: |+
> + The Arm SP805 IP implements a watchdog device, which triggers an interrupt
> + after a configurable time period. If that interrupt has not been serviced
> + when the next interrupt would be triggered, the reset signal is asserted.
> +
> +allOf:
> + - $ref: /schemas/arm/primecell.yaml#

Should also ref watchdog.yaml here.

> +
> +# Need a custom select here or 'arm,primecell' will match on lots of nodes
> +select:
> + properties:
> + compatible:
> + contains:
> + const: arm,sp805
> + required:
> + - compatible
> +
> +properties:
> + compatible:
> + items:
> + - const: arm,sp805
> + - const: arm,primecell
> +
> + interrupts:
> + maxItems: 1
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + description: |
> + Clocks driving the watchdog timer hardware. The first clock is used
> + for the actual watchdog counter. The second clock drives the register
> + interface.
> + minItems: 2
> + maxItems: 2
> +
> + clock-names:
> + items:
> + - const: wdog_clk
> + - const: apb_pclk
> +
> + timeout-sec:
> + description: |
> + Should specify default WDT timeout in seconds. If unset, the default
> + timeout is determined by the driver.
> + $ref: /schemas/types.yaml#/definitions/uint32

You can drop this as it is part of watchdog.yaml.

> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names

Add:

unevaluatedProperties: false


> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + watchdog@66090000 {
> + compatible = "arm,sp805", "arm,primecell";
> + reg = <0x66090000 0x1000>;
> + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&wdt_clk>, <&apb_pclk>;
> + clock-names = "wdog_clk", "apb_pclk";
> + };
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-09-08 19:22    [W:0.261 / U:1.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site