lkml.org 
[lkml]   [2020]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] misc: fastrpc: add ioctl for attaching to sensors pd
From
Date


On 07/09/2020 15:02, Jonathan Marek wrote:
>>>
>>> Srini do you have any suggestions for how to name these values?
>>
>> These are domain id corresponding to each core.
>> you can use SDSP_DOMAIN_ID in here!
>> these are already defined in the file as:
>>
>> #define ADSP_DOMAIN_ID (0)
>> #define MDSP_DOMAIN_ID (1)
>> #define SDSP_DOMAIN_ID (2)
>> #define CDSP_DOMAIN_ID (3)
>>
>
> I don't think this is right:
>
> FASTRPC_IOCTL_INIT_ATTACH uses pd = 0
> FASTRPC_IOCTL_INIT_CREATE uses pd = 1
>
> And these two ioctl are used with all DSP cores. So it wouldn't make
> sense for the pd value to correspond to the domain id.
>
You are right, values are pretty much similar to domain ids but not
exactly the same as Protection Domain(PD) ids.

I spoke to qcom guys about this, and this is what I have.

0 is Audio Process PD
1 is Dynamic User PD, cases like SNPE or CV
2 is Sensor Process PD.


Hope this helps!

--srini

\
 
 \ /
  Last update: 2020-09-08 10:21    [W:1.378 / U:24.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site