lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board
Date
This patch enables CAN1 interface exposed through connector J20 on the
carrier board.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
---
arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index 818f1a850c62..66881a473d6c 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -198,6 +198,13 @@
};
};

+&can1 {
+ pinctrl-0 = <&can1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&cmt0 {
status = "okay";
};
@@ -214,6 +221,15 @@
};
};

+&gpio1 {
+ can-trx-en-gpio{
+ gpio-hog;
+ gpios = <28 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "can-trx-en-gpio";
+ };
+};
+
&hsusb {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
@@ -287,6 +303,11 @@
function = "tpu0";
};

+ can1_pins: can1 {
+ groups = "can1_data_b";
+ function = "can1";
+ };
+
i2c2_pins: i2c2 {
groups = "i2c2_b";
function = "i2c2";
--
2.17.1
\
 
 \ /
  Last update: 2020-09-07 17:58    [W:0.073 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site