lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3] mmc: host: Enable compile testing of multiple drivers
On Mon, 7 Sep 2020 at 12:53, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> Multiple MMC host controller driver can be compile tested as they do not
> depend on architecture specific headers.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Applied for next, thanks!

>
> ---
>
> Changes since v2:
> 1. Rebase.
>
> Please expect conflicts around MMC_SDHCI_S3C with:
> https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git/log/?h=next/soc-s3c-cleanup

I see. Thanks for sharing. Looks like the fixup should be possible to
carry for Stephen in linux-next.

Kind regards
Uffe

>
> Possible resolution:
> -depends on PLAT_SAMSUNG || COMPILE_TEST
> +depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> ---
> drivers/mmc/host/Kconfig | 40 +++++++++++++++++++++-------------------
> 1 file changed, 21 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index ddbed6f41c41..dc646359b4ff 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -178,7 +178,7 @@ config MMC_SDHCI_OF_AT91
> config MMC_SDHCI_OF_ESDHC
> tristate "SDHCI OF support for the Freescale eSDHC controller"
> depends on MMC_SDHCI_PLTFM
> - depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE
> + depends on PPC || ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST
> select MMC_SDHCI_IO_ACCESSORS
> select FSL_GUTS
> help
> @@ -216,7 +216,7 @@ config MMC_SDHCI_OF_DWCMSHC
> config MMC_SDHCI_OF_SPARX5
> tristate "SDHCI OF support for the MCHP Sparx5 SoC"
> depends on MMC_SDHCI_PLTFM
> - depends on ARCH_SPARX5
> + depends on ARCH_SPARX5 || COMPILE_TEST
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> found in the MCHP Sparx5 SoC.
> @@ -238,7 +238,7 @@ config MMC_SDHCI_CADENCE
>
> config MMC_SDHCI_CNS3XXX
> tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
> - depends on ARCH_CNS3XXX
> + depends on ARCH_CNS3XXX || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> help
> This selects the SDHCI support for CNS3xxx System-on-Chip devices.
> @@ -262,7 +262,7 @@ config MMC_SDHCI_ESDHC_MCF
>
> config MMC_SDHCI_ESDHC_IMX
> tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
> - depends on ARCH_MXC
> + depends on ARCH_MXC || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> select MMC_SDHCI_IO_ACCESSORS
> select MMC_CQHCI
> @@ -276,7 +276,7 @@ config MMC_SDHCI_ESDHC_IMX
>
> config MMC_SDHCI_DOVE
> tristate "SDHCI support on Marvell's Dove SoC"
> - depends on ARCH_DOVE || MACH_DOVE
> + depends on ARCH_DOVE || MACH_DOVE || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> select MMC_SDHCI_IO_ACCESSORS
> help
> @@ -289,7 +289,7 @@ config MMC_SDHCI_DOVE
>
> config MMC_SDHCI_TEGRA
> tristate "SDHCI platform support for the Tegra SD/MMC Controller"
> - depends on ARCH_TEGRA
> + depends on ARCH_TEGRA || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> select MMC_SDHCI_IO_ACCESSORS
> select MMC_CQHCI
> @@ -301,7 +301,8 @@ config MMC_SDHCI_TEGRA
>
> config MMC_SDHCI_S3C
> tristate "SDHCI support on Samsung S3C SoC"
> - depends on MMC_SDHCI && PLAT_SAMSUNG
> + depends on MMC_SDHCI
> + depends on PLAT_SAMSUNG || COMPILE_TEST
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> often referrered to as the HSMMC block in some of the Samsung S3C
> @@ -313,7 +314,7 @@ config MMC_SDHCI_S3C
>
> config MMC_SDHCI_SIRF
> tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
> - depends on ARCH_SIRF
> + depends on ARCH_SIRF || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> select MMC_SDHCI_IO_ACCESSORS
> help
> @@ -351,7 +352,8 @@ config MMC_SDHCI_PXAV2
>
> config MMC_SDHCI_SPEAR
> tristate "SDHCI support on ST SPEAr platform"
> - depends on MMC_SDHCI && PLAT_SPEAR
> + depends on MMC_SDHCI
> + depends on PLAT_SPEAR || COMPILE_TEST
> depends on OF
> help
> This selects the Secure Digital Host Controller Interface (SDHCI)
> @@ -374,7 +376,7 @@ config MMC_SDHCI_S3C_DMA
>
> config MMC_SDHCI_BCM_KONA
> tristate "SDHCI support on Broadcom KONA platform"
> - depends on ARCH_BCM_MOBILE
> + depends on ARCH_BCM_MOBILE || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> help
> This selects the Broadcom Kona Secure Digital Host Controller
> @@ -422,7 +424,7 @@ config MMC_SDHCI_IPROC
>
> config MMC_MESON_GX
> tristate "Amlogic S905/GX*/AXG SD/MMC Host Controller support"
> - depends on ARCH_MESON
> + depends on ARCH_MESON|| COMPILE_TEST
> help
> This selects support for the Amlogic SD/MMC Host Controller
> found on the S905/GX*/AXG family of SoCs. This controller is
> @@ -458,7 +460,7 @@ config MMC_MESON_MX_SDIO
>
> config MMC_MOXART
> tristate "MOXART SD/MMC Host Controller support"
> - depends on ARCH_MOXART
> + depends on ARCH_MOXART || COMPILE_TEST
> help
> This selects support for the MOXART SD/MMC Host Controller.
> MOXA provides one multi-functional card reader which can
> @@ -467,7 +469,7 @@ config MMC_MOXART
>
> config MMC_SDHCI_ST
> tristate "SDHCI support on STMicroelectronics SoC"
> - depends on ARCH_STI || FSP2
> + depends on ARCH_STI || FSP2 || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> select MMC_SDHCI_IO_ACCESSORS
> help
> @@ -587,7 +589,7 @@ config MMC_TIFM_SD
>
> config MMC_MVSDIO
> tristate "Marvell MMC/SD/SDIO host driver"
> - depends on PLAT_ORION
> + depends on PLAT_ORION || (COMPILE_TEST && ARM)
> depends on OF
> help
> This selects the Marvell SDIO host driver.
> @@ -599,7 +601,7 @@ config MMC_MVSDIO
>
> config MMC_DAVINCI
> tristate "TI DAVINCI Multimedia Card Interface support"
> - depends on ARCH_DAVINCI
> + depends on ARCH_DAVINCI || COMPILE_TEST
> help
> This selects the TI DAVINCI Multimedia card Interface.
> If you have an DAVINCI board with a Multimedia Card slot,
> @@ -628,7 +630,7 @@ config MMC_SPI
>
> config MMC_S3C
> tristate "Samsung S3C SD/MMC Card Interface support"
> - depends on ARCH_S3C24XX
> + depends on ARCH_S3C24XX || COMPILE_TEST
> depends on S3C24XX_DMAC
> help
> This selects a driver for the MCI interface found in
> @@ -681,7 +683,7 @@ config MMC_SDRICOH_CS
>
> config MMC_SDHCI_SPRD
> tristate "Spreadtrum SDIO host Controller"
> - depends on ARCH_SPRD
> + depends on ARCH_SPRD || COMPILE_TEST
> depends on MMC_SDHCI_PLTFM
> select MMC_SDHCI_IO_ACCESSORS
> select MMC_HSQ
> @@ -698,7 +700,7 @@ config MMC_TMIO_CORE
>
> config MMC_TMIO
> tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
> - depends on MFD_TMIO || MFD_ASIC3
> + depends on MFD_TMIO || MFD_ASIC3 || COMPILE_TEST
> select MMC_TMIO_CORE
> help
> This provides support for the SD/MMC cell found in TC6393XB,
> @@ -971,7 +973,7 @@ config MMC_REALTEK_USB
>
> config MMC_SUNXI
> tristate "Allwinner sunxi SD/MMC Host Controller support"
> - depends on ARCH_SUNXI
> + depends on ARCH_SUNXI || COMPILE_TEST
> help
> This selects support for the SD/MMC Host Controller on
> Allwinner sunxi SoCs.
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-09-07 14:19    [W:0.062 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site