lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw
From
Date
Hi Grygorii,

On 05/09/2020 2.38, Grygorii Strashko wrote:
> Hi All,
>
> arm64: dts: ti: k3-j7200: add dma and mcu cpsw nodes
>
> This series adds DT nodes for TI J7200 SoC
> - INTR/INTA, Ringacc and UDMA nodes for Main and MCU NAVSS, which are compatible
> with J721E Soc, to enable DMA support
> - MCU CPSW2g DT nodes to enable networking
>
> This series depends on:
> - [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform [1]
> from: Lokesh Vutla <lokeshvutla@ti.com>
> - [PATCH] soc: ti: k3-socinfo: Add entry for J7200 [2]
> from: Peter Ujfalusi <peter.ujfalusi@ti.com>

you also need to pick:
[PATCH] dmaengine: ti: k3-udma: Use soc_device_match() for SoC dependent parameters [3]

>
> [1] https://lore.kernel.org/linux-arm-kernel/20200827065144.17683-1-lokeshvutla@ti.com/T/#m141ae4d0dd818518c00c81806d689983d6e832e6
> [2] https://lore.kernel.org/patchwork/patch/1283230/

[3] https://lore.kernel.org/lkml/20200904120009.30941-1-peter.ujfalusi@ti.com/

>
> Grygorii Strashko (3):
> arm64: dts: ti: k3-j7200-main: add main navss cpts node
> arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node
> arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux
> and phy defs
>
> Peter Ujfalusi (1):
> arm64: dts: ti: k3-j7200: add DMA support
>
> .../dts/ti/k3-j7200-common-proc-board.dts | 45 +++++++
> arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 73 +++++++++++
> .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 118 ++++++++++++++++++
> 3 files changed, 236 insertions(+)
>

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2020-09-07 11:20    [W:0.050 / U:11.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site