lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/7] dts: arm64: ls1043a: Add SCFG phandle for PCIe nodes
Date
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

The LS1043A PCIe controller has some control registers
in SCFG block, so add the SCFG phandle for each PCIe
controller DT node.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 70e07612da12..30ccf1fdb851 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -822,6 +822,7 @@
interrupts = <0 118 0x4>, /* controller interrupt */
<0 117 0x4>; /* PME interrupt */
interrupt-names = "intr", "pme";
+ fsl,pcie-scfg = <&scfg 0>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -849,6 +850,7 @@
interrupts = <0 128 0x4>,
<0 127 0x4>;
interrupt-names = "intr", "pme";
+ fsl,pcie-scfg = <&scfg 1>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -876,6 +878,7 @@
interrupts = <0 162 0x4>,
<0 161 0x4>;
interrupt-names = "intr", "pme";
+ fsl,pcie-scfg = <&scfg 2>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
--
2.17.1
\
 
 \ /
  Last update: 2020-09-07 07:47    [W:0.128 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site