lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 0/4] soundwire: qcom: add support for mmio soundwire master
From
Date


On 05/09/2020 18:39, Jonathan Marek wrote:
> This adds initial support for soundwire device on sm8250.
>
> Tested with the "wsa" sdw device, which is simpler than the others.
>
> v2 addresses some feedback, but I kept this series as simple as possible.
> In particular, I didn't implement CMD_NACKED from FIFO_STATUS, because
> the downstream driver doesn't define this bit, so I can't implement it.
> Soundwire works without it and It shouldn't be difficult to implement later.
>
> Jonathan Marek (4):
> soundwire: qcom: fix abh/ahb typo
> soundwire: qcom: avoid dependency on CONFIG_SLIMBUS
> soundwire: qcom: add support for mmio soundwire master devices
> soundwire: qcom: add v1.5.1 compatible
>
Hi Jonathan,
I have tested these patches on RB5 with WSA8810 and they work fine.

I can try to add support to command ignored in future, but for now these
look good to me!


Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>


Thanks,
srini

> .../bindings/soundwire/qcom,sdw.txt | 1 +
> drivers/soundwire/Kconfig | 2 +-
> drivers/soundwire/qcom.c | 38 +++++++++++++++++--
> 3 files changed, 36 insertions(+), 5 deletions(-)
>

\
 
 \ /
  Last update: 2020-09-07 10:19    [W:0.094 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site