lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] leds: pwm: Allow automatic labels for DT based devices
Date
If LEDs are configured through device tree and the property 'label' is
omitted, the label is supposed to be generated from the properties
'function' and 'color' if present. While this works fine for e.g. the
'leds-gpio' driver, it did not for 'leds-pwm'.

The reason is, you get this label naming magic only if you add a LED
device through 'devm_led_classdev_register_ext()' and pass a pointer to
the current device tree node. The approach to fix this was adopted from
the 'leds-gpio' driver.

For the following node from dts the LED appeared as 'led5' in sysfs
before and as 'red:debug' after this change.

pwm_leds {
compatible = "pwm-leds";

led5 {
function = LED_FUNCTION_DEBUG;
color = <LED_COLOR_ID_RED>;
pwms = <&pwm0 2 10000000 0>;
max-brightness = <127>;

linux,default-trigger = "heartbeat";
panic-indicator;
};
};

Signed-off-by: Alexander Dahl <post@lespocky.de>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
---

Notes:
v2 -> v3:
* added Acked-by

drivers/leds/leds-pwm.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index ef7b91bd2064..a27a1d75a3e9 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -65,6 +65,7 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
struct led_pwm *led, struct fwnode_handle *fwnode)
{
struct led_pwm_data *led_data = &priv->leds[priv->num_leds];
+ struct led_init_data init_data = {};
int ret;

led_data->active_low = led->active_low;
@@ -90,7 +91,13 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,

pwm_init_state(led_data->pwm, &led_data->pwmstate);

- ret = devm_led_classdev_register(dev, &led_data->cdev);
+ if (fwnode) {
+ init_data.fwnode = fwnode;
+ ret = devm_led_classdev_register_ext(dev, &led_data->cdev,
+ &init_data);
+ } else {
+ ret = devm_led_classdev_register(dev, &led_data->cdev);
+ }
if (ret) {
dev_err(dev, "failed to register PWM led for %s: %d\n",
led->name, ret);
--
2.20.1
\
 
 \ /
  Last update: 2020-09-07 06:36    [W:0.097 / U:8.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site