lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH next 4/6] ARM: dts: dra7x-evm: switch to new cpsw switch drv
Date
Switch all TI DRA7x boards to use new cpsw switch driver. Those boards
configured in dual_mac mode by default. Hence, dual_mac mode has been
preserved the same way between legacy and new driver it's safe to switch
drivers.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
arch/arm/boot/dts/dra7-evm.dts | 13 ++++++-------
arch/arm/boot/dts/dra71-evm.dts | 14 +++++++-------
arch/arm/boot/dts/dra72-evm-common.dtsi | 4 ----
arch/arm/boot/dts/dra72-evm-revc.dts | 14 +++++++-------
arch/arm/boot/dts/dra72-evm.dts | 13 +++++++++----
arch/arm/boot/dts/dra76-evm.dts | 14 ++++++--------
6 files changed, 35 insertions(+), 37 deletions(-)

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index a952d934fcf2..051aac4e95b7 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -537,24 +537,23 @@
ti,no-idle-on-init;
};

-&mac {
+&mac_sw {
status = "okay";
- dual_emac;
};

-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&ethphy0>;
phy-mode = "rgmii";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};

-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <&ethphy1>;
phy-mode = "rgmii";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};

-&davinci_mdio {
+&davinci_mdio_sw {
ethphy0: ethernet-phy@2 {
reg = <2>;
};
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index 10da51bee42f..cad58f733bd6 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -219,26 +219,26 @@
vqmmc-supply = <&evm_1v8_sw>;
};

-&mac {
+&mac_sw {
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
<&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */
<&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */
- dual_emac;
+ status = "okay";
};

-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};

-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};

-&davinci_mdio {
+&davinci_mdio_sw {
dp83867_0: ethernet-phy@2 {
reg = <2>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 9273a7d6fa29..8d0d960107fb 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -462,10 +462,6 @@
};
};

-&mac {
- status = "okay";
-};
-
&dcan1 {
status = "ok";
pinctrl-names = "default", "sleep", "active";
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index 54dab0f212d1..f242b937f88c 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -77,26 +77,26 @@
interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
};

-&mac {
+&mac_sw {
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
<&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */
<&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */
- dual_emac;
+ status = "okay";
};

-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};

-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};

-&davinci_mdio {
+&davinci_mdio_sw {
dp83867_0: ethernet-phy@2 {
reg = <2>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 6ea9936f7d9c..5f62f92eb96c 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -69,17 +69,22 @@
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
};

-&mac {
- slaves = <1>;
+&mac_sw {
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
+ status = "okay";
};

-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&ethphy0>;
phy-mode = "rgmii";
+ ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+ status = "disabled";
};

-&davinci_mdio {
+&davinci_mdio_sw {
ethphy0: ethernet-phy@3 {
reg = <3>;
};
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 803981cc762e..34f655be4fb4 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -475,25 +475,23 @@
status = "disabled";
};

-&mac {
+&mac_sw {
status = "okay";
-
- dual_emac;
};

-&cpsw_emac0 {
+&cpsw_port1 {
phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <1>;
+ ti,dual-emac-pvid = <1>;
};

-&cpsw_emac1 {
+&cpsw_port2 {
phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
- dual_emac_res_vlan = <2>;
+ ti,dual-emac-pvid = <2>;
};

-&davinci_mdio {
+&davinci_mdio_sw {
dp83867_0: ethernet-phy@2 {
reg = <2>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
--
2.17.1
\
 
 \ /
  Last update: 2020-09-07 22:22    [W:0.065 / U:8.936 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site