lkml.org 
[lkml]   [2020]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/11] ARM: dts: s3c24xx: override nods by label
Date
Using full paths to extend or override a device tree node is error
prone. If there was a typo error, a new node will be created instead of
extending the existing node. This will lead to run-time errors that
could be hard to detect.

A mistyped label on the other hand, will cause a dtc compile error
(during build time).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c2416.dtsi | 104 ++++++++++++++++-----------------
arch/arm/boot/dts/s3c24xx.dtsi | 22 +++----
2 files changed, 63 insertions(+), 63 deletions(-)

diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index 6adf64ea3ff2..d1dec9f52f69 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -23,49 +23,12 @@
};
};

- interrupt-controller@4a000000 {
- compatible = "samsung,s3c2416-irq";
- };
-
clocks: clock-controller@4c000000 {
compatible = "samsung,s3c2416-clock";
reg = <0x4c000000 0x40>;
#clock-cells = <1>;
};

- pinctrl@56000000 {
- compatible = "samsung,s3c2416-pinctrl";
- };
-
- timer@51000000 {
- clocks = <&clocks PCLK_PWM>;
- clock-names = "timers";
- };
-
- uart_0: serial@50000000 {
- compatible = "samsung,s3c2440-uart";
- clock-names = "uart", "clk_uart_baud2",
- "clk_uart_baud3";
- clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
- <&clocks SCLK_UART>;
- };
-
- uart_1: serial@50004000 {
- compatible = "samsung,s3c2440-uart";
- clock-names = "uart", "clk_uart_baud2",
- "clk_uart_baud3";
- clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
- <&clocks SCLK_UART>;
- };
-
- uart_2: serial@50008000 {
- compatible = "samsung,s3c2440-uart";
- clock-names = "uart", "clk_uart_baud2",
- "clk_uart_baud3";
- clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
- <&clocks SCLK_UART>;
- };
-
uart_3: serial@5000c000 {
compatible = "samsung,s3c2440-uart";
reg = <0x5000C000 0x4000>;
@@ -98,22 +61,59 @@
<&clocks MUX_HSMMC1>;
status = "disabled";
};
+};

- watchdog: watchdog@53000000 {
- interrupts = <1 9 27 3>;
- clocks = <&clocks PCLK_WDT>;
- clock-names = "watchdog";
- };
+&i2c {
+ compatible = "samsung,s3c2440-i2c";
+ clocks = <&clocks PCLK_I2C0>;
+ clock-names = "i2c";
+};

- rtc: rtc@57000000 {
- compatible = "samsung,s3c2416-rtc";
- clocks = <&clocks PCLK_RTC>;
- clock-names = "rtc";
- };
+&intc {
+ compatible = "samsung,s3c2416-irq";
+};

- i2c@54000000 {
- compatible = "samsung,s3c2440-i2c";
- clocks = <&clocks PCLK_I2C0>;
- clock-names = "i2c";
- };
+&pinctrl_0 {
+ compatible = "samsung,s3c2416-pinctrl";
+};
+
+&rtc {
+ compatible = "samsung,s3c2416-rtc";
+ clocks = <&clocks PCLK_RTC>;
+ clock-names = "rtc";
+};
+
+&timer {
+ clocks = <&clocks PCLK_PWM>;
+ clock-names = "timers";
+};
+
+&uart_0 {
+ compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clocks SCLK_UART>;
+};
+
+&uart_1 {
+ compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+ <&clocks SCLK_UART>;
+};
+
+&uart_2 {
+ compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+ <&clocks SCLK_UART>;
+};
+
+&watchdog {
+ interrupts = <1 9 27 3>;
+ clocks = <&clocks PCLK_WDT>;
+ clock-names = "watchdog";
};
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
index 0d49d7680e72..80d4ce79be55 100644
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ b/arch/arm/boot/dts/s3c24xx.dtsi
@@ -13,12 +13,12 @@

aliases {
pinctrl0 = &pinctrl_0;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
+ serial0 = &uart_0;
+ serial1 = &uart_1;
+ serial2 = &uart_2;
};

- intc:interrupt-controller@4a000000 {
+ intc: interrupt-controller@4a000000 {
compatible = "samsung,s3c2410-irq";
reg = <0x4a000000 0x100>;
interrupt-controller;
@@ -39,49 +39,49 @@
};
};

- timer@51000000 {
+ timer: timer@51000000 {
compatible = "samsung,s3c2410-pwm";
reg = <0x51000000 0x1000>;
interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
#pwm-cells = <3>;
};

- uart0: serial@50000000 {
+ uart_0: serial@50000000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50000000 0x4000>;
interrupts = <1 28 0 4>, <1 28 1 4>;
status = "disabled";
};

- uart1: serial@50004000 {
+ uart_1: serial@50004000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50004000 0x4000>;
interrupts = <1 23 3 4>, <1 23 4 4>;
status = "disabled";
};

- uart2: serial@50008000 {
+ uart_2: serial@50008000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50008000 0x4000>;
interrupts = <1 15 6 4>, <1 15 7 4>;
status = "disabled";
};

- watchdog@53000000 {
+ watchdog: watchdog@53000000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x53000000 0x100>;
interrupts = <0 0 9 3>;
status = "disabled";
};

- rtc@57000000 {
+ rtc: rtc@57000000 {
compatible = "samsung,s3c2410-rtc";
reg = <0x57000000 0x100>;
interrupts = <0 0 30 3>, <0 0 8 3>;
status = "disabled";
};

- i2c@54000000 {
+ i2c: i2c@54000000 {
compatible = "samsung,s3c2410-i2c";
reg = <0x54000000 0x100>;
interrupts = <0 0 27 3>;
--
2.17.1
\
 
 \ /
  Last update: 2020-09-07 20:35    [W:0.566 / U:4.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site