lkml.org 
[lkml]   [2020]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw
Date
Hi All,

arm64: dts: ti: k3-j7200: add dma and mcu cpsw nodes

This series adds DT nodes for TI J7200 SoC
- INTR/INTA, Ringacc and UDMA nodes for Main and MCU NAVSS, which are compatible
with J721E Soc, to enable DMA support
- MCU CPSW2g DT nodes to enable networking

This series depends on:
- [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform [1]
from: Lokesh Vutla <lokeshvutla@ti.com>
- [PATCH] soc: ti: k3-socinfo: Add entry for J7200 [2]
from: Peter Ujfalusi <peter.ujfalusi@ti.com>

[1] https://lore.kernel.org/linux-arm-kernel/20200827065144.17683-1-lokeshvutla@ti.com/T/#m141ae4d0dd818518c00c81806d689983d6e832e6
[2] https://lore.kernel.org/patchwork/patch/1283230/

Grygorii Strashko (3):
arm64: dts: ti: k3-j7200-main: add main navss cpts node
arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node
arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux
and phy defs

Peter Ujfalusi (1):
arm64: dts: ti: k3-j7200: add DMA support

.../dts/ti/k3-j7200-common-proc-board.dts | 45 +++++++
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 73 +++++++++++
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 118 ++++++++++++++++++
3 files changed, 236 insertions(+)

--
2.17.1

\
 
 \ /
  Last update: 2020-09-05 01:39    [W:0.061 / U:2.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site