lkml.org 
[lkml]   [2020]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 53/80] drm/vc4: hdmi: Add PHY init and disable function
Date
The HDMI PHY in the BCM2711 HDMI controller is significantly more
complicated to setup than in the older BCM283x SoCs.

Let's add hooks to enable and disable the PHY.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/Makefile | 1 +
drivers/gpu/drm/vc4/vc4_hdmi.c | 14 +++++++-------
drivers/gpu/drm/vc4/vc4_hdmi.h | 13 +++++++++++++
drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 25 +++++++++++++++++++++++++
4 files changed, 46 insertions(+), 7 deletions(-)
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_phy.c

diff --git a/drivers/gpu/drm/vc4/Makefile b/drivers/gpu/drm/vc4/Makefile
index b303703bc7f3..d0163e18e9ca 100644
--- a/drivers/gpu/drm/vc4/Makefile
+++ b/drivers/gpu/drm/vc4/Makefile
@@ -12,6 +12,7 @@ vc4-y := \
vc4_kms.o \
vc4_gem.o \
vc4_hdmi.o \
+ vc4_hdmi_phy.o \
vc4_vec.o \
vc4_hvs.o \
vc4_irq.o \
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 77971be075ec..f3cc612f6a0b 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -321,7 +321,9 @@ static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder)

HDMI_WRITE(HDMI_RAM_PACKET_CONFIG, 0);

- HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+ if (vc4_hdmi->variant->phy_disable)
+ vc4_hdmi->variant->phy_disable(vc4_hdmi);
+
HDMI_WRITE(HDMI_VID_CTL,
HDMI_READ(HDMI_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE);

@@ -381,12 +383,8 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
if (vc4_hdmi->variant->reset)
vc4_hdmi->variant->reset(vc4_hdmi);

- /* PHY should be in reset, like
- * vc4_hdmi_encoder_disable() does.
- */
- HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
-
- HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0);
+ if (vc4_hdmi->variant->phy_init)
+ vc4_hdmi->variant->phy_init(vc4_hdmi, mode);

if (debug_dump_regs) {
struct drm_printer p = drm_info_printer(&vc4_hdmi->pdev->dev);
@@ -1432,6 +1430,8 @@ static const struct vc4_hdmi_variant bcm2835_variant = {

.init_resources = vc4_hdmi_init_resources,
.reset = vc4_hdmi_reset,
+ .phy_init = vc4_hdmi_phy_init,
+ .phy_disable = vc4_hdmi_phy_disable,
};

static const struct of_device_id vc4_hdmi_dt_match[] = {
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 17a30589f39c..32c80161c786 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -21,6 +21,8 @@ to_vc4_hdmi_encoder(struct drm_encoder *encoder)
return container_of(encoder, struct vc4_hdmi_encoder, base.base);
}

+struct drm_display_mode;
+
struct vc4_hdmi;
struct vc4_hdmi_register;

@@ -38,6 +40,13 @@ struct vc4_hdmi_variant {

/* Callback to reset the HDMI block */
void (*reset)(struct vc4_hdmi *vc4_hdmi);
+
+ /* Callback to initialize the PHY according to the mode */
+ void (*phy_init)(struct vc4_hdmi *vc4_hdmi,
+ struct drm_display_mode *mode);
+
+ /* Callback to disable the PHY */
+ void (*phy_disable)(struct vc4_hdmi *vc4_hdmi);
};

/* HDMI audio information */
@@ -95,4 +104,8 @@ encoder_to_vc4_hdmi(struct drm_encoder *encoder)
return container_of(_encoder, struct vc4_hdmi, encoder);
}

+void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
+ struct drm_display_mode *mode);
+void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi);
+
#endif /* _VC4_HDMI_H_ */
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi_phy.c b/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
new file mode 100644
index 000000000000..5a1746877bb5
--- /dev/null
+++ b/drivers/gpu/drm/vc4/vc4_hdmi_phy.c
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015 Broadcom
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ * Copyright (C) 2013 Red Hat
+ * Author: Rob Clark <robdclark@gmail.com>
+ */
+
+#include "vc4_hdmi.h"
+#include "vc4_hdmi_regs.h"
+
+void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi, struct drm_display_mode *mode)
+{
+ /* PHY should be in reset, like
+ * vc4_hdmi_encoder_disable() does.
+ */
+
+ HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+ HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0);
+}
+
+void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi)
+{
+ HDMI_WRITE(HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+}
--
git-series 0.9.1
\
 
 \ /
  Last update: 2020-09-03 10:07    [W:0.239 / U:2.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site