lkml.org 
[lkml]   [2020]   [Sep]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 55/80] drm/vc4: hdmi: Add a CSC setup callback
Date
Similarly to the previous patches, the CSC setup is slightly different in
the BCM2711 than in the previous generations. Let's add a callback for it.

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 70 +++++++++++++++++++++--------------
drivers/gpu/drm/vc4/vc4_hdmi.h | 3 ++-
2 files changed, 45 insertions(+), 28 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index c29376c3fd8a..532618e02399 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -334,6 +334,41 @@ static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder)
DRM_ERROR("Failed to release power domain: %d\n", ret);
}

+static void vc4_hdmi_csc_setup(struct vc4_hdmi *vc4_hdmi, bool enable)
+{
+ u32 csc_ctl;
+
+ csc_ctl = VC4_SET_FIELD(VC4_HD_CSC_CTL_ORDER_BGR,
+ VC4_HD_CSC_CTL_ORDER);
+
+ if (enable) {
+ /* CEA VICs other than #1 requre limited range RGB
+ * output unless overridden by an AVI infoframe.
+ * Apply a colorspace conversion to squash 0-255 down
+ * to 16-235. The matrix here is:
+ *
+ * [ 0 0 0.8594 16]
+ * [ 0 0.8594 0 16]
+ * [ 0.8594 0 0 16]
+ * [ 0 0 0 1]
+ */
+ csc_ctl |= VC4_HD_CSC_CTL_ENABLE;
+ csc_ctl |= VC4_HD_CSC_CTL_RGB2YCC;
+ csc_ctl |= VC4_SET_FIELD(VC4_HD_CSC_CTL_MODE_CUSTOM,
+ VC4_HD_CSC_CTL_MODE);
+
+ HDMI_WRITE(HDMI_CSC_12_11, (0x000 << 16) | 0x000);
+ HDMI_WRITE(HDMI_CSC_14_13, (0x100 << 16) | 0x6e0);
+ HDMI_WRITE(HDMI_CSC_22_21, (0x6e0 << 16) | 0x000);
+ HDMI_WRITE(HDMI_CSC_24_23, (0x100 << 16) | 0x000);
+ HDMI_WRITE(HDMI_CSC_32_31, (0x000 << 16) | 0x6e0);
+ HDMI_WRITE(HDMI_CSC_34_33, (0x100 << 16) | 0x000);
+ }
+
+ /* The RGB order applies even when CSC is disabled. */
+ HDMI_WRITE(HDMI_CSC_CTL, csc_ctl);
+}
+
static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
{
struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
@@ -357,7 +392,6 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
mode->crtc_vsync_end -
interlaced,
VC4_HDMI_VERTB_VBP));
- u32 csc_ctl;
int ret;

ret = pm_runtime_get_sync(&vc4_hdmi->pdev->dev);
@@ -428,41 +462,20 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder)
(vsync_pos ? 0 : VC4_HD_VID_CTL_VSYNC_LOW) |
(hsync_pos ? 0 : VC4_HD_VID_CTL_HSYNC_LOW));

- csc_ctl = VC4_SET_FIELD(VC4_HD_CSC_CTL_ORDER_BGR,
- VC4_HD_CSC_CTL_ORDER);

if (vc4_encoder->hdmi_monitor &&
- drm_default_rgb_quant_range(mode) ==
- HDMI_QUANTIZATION_RANGE_LIMITED) {
- /* CEA VICs other than #1 requre limited range RGB
- * output unless overridden by an AVI infoframe.
- * Apply a colorspace conversion to squash 0-255 down
- * to 16-235. The matrix here is:
- *
- * [ 0 0 0.8594 16]
- * [ 0 0.8594 0 16]
- * [ 0.8594 0 0 16]
- * [ 0 0 0 1]
- */
- csc_ctl |= VC4_HD_CSC_CTL_ENABLE;
- csc_ctl |= VC4_HD_CSC_CTL_RGB2YCC;
- csc_ctl |= VC4_SET_FIELD(VC4_HD_CSC_CTL_MODE_CUSTOM,
- VC4_HD_CSC_CTL_MODE);
+ drm_default_rgb_quant_range(mode) == HDMI_QUANTIZATION_RANGE_LIMITED) {
+ if (vc4_hdmi->variant->csc_setup)
+ vc4_hdmi->variant->csc_setup(vc4_hdmi, true);

- HDMI_WRITE(HDMI_CSC_12_11, (0x000 << 16) | 0x000);
- HDMI_WRITE(HDMI_CSC_14_13, (0x100 << 16) | 0x6e0);
- HDMI_WRITE(HDMI_CSC_22_21, (0x6e0 << 16) | 0x000);
- HDMI_WRITE(HDMI_CSC_24_23, (0x100 << 16) | 0x000);
- HDMI_WRITE(HDMI_CSC_32_31, (0x000 << 16) | 0x6e0);
- HDMI_WRITE(HDMI_CSC_34_33, (0x100 << 16) | 0x000);
vc4_encoder->limited_rgb_range = true;
} else {
+ if (vc4_hdmi->variant->csc_setup)
+ vc4_hdmi->variant->csc_setup(vc4_hdmi, false);
+
vc4_encoder->limited_rgb_range = false;
}

- /* The RGB order applies even when CSC is disabled. */
- HDMI_WRITE(HDMI_CSC_CTL, csc_ctl);
-
HDMI_WRITE(HDMI_FIFO_CTL, VC4_HDMI_FIFO_CTL_MASTER_SLAVE_N);

if (debug_dump_regs) {
@@ -1430,6 +1443,7 @@ static const struct vc4_hdmi_variant bcm2835_variant = {
.num_registers = ARRAY_SIZE(vc4_hdmi_fields),

.init_resources = vc4_hdmi_init_resources,
+ .csc_setup = vc4_hdmi_csc_setup,
.reset = vc4_hdmi_reset,
.phy_init = vc4_hdmi_phy_init,
.phy_disable = vc4_hdmi_phy_disable,
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 950accbc44e4..c8fd58548ea2 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -41,6 +41,9 @@ struct vc4_hdmi_variant {
/* Callback to reset the HDMI block */
void (*reset)(struct vc4_hdmi *vc4_hdmi);

+ /* Callback to enable / disable the CSC */
+ void (*csc_setup)(struct vc4_hdmi *vc4_hdmi, bool enable);
+
/* Callback to initialize the PHY according to the mode */
void (*phy_init)(struct vc4_hdmi *vc4_hdmi,
struct drm_display_mode *mode);
--
git-series 0.9.1
\
 
 \ /
  Last update: 2020-09-03 10:06    [W:0.487 / U:5.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site