[lkml]   [2020]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/3] Improve s0ix flows for systems i219LM
commit e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME systems")
disabled s0ix flows for systems that have various incarnations of the
i219-LM ethernet controller. This was done because of some regressions
caused by an earlier
commit 632fbd5eb5b0e ("e1000e: fix S0ix flows for cable connected case")
with i219-LM controller.

Performing suspend to idle with these ethernet controllers requires a properly
configured system. To make enabling such systems easier, this patch
series offers configuration options to enable/disable the flows.

The flows have also been confirmed to be configured correctly on Dell's Latitude
and Precision CML systems containing the i219-LM controller, when the kernel also
contains the fix for s0i3.2 entry here:

Patches 2 and 3 will turn the behavior on by default for Dell's CML systems.
These patches should only be carried if that patch linked above is also applied.

Mario Limonciello (3):
e1000e: allow turning s0ix flows on for systems with ME
e1000e: Add Dell's Comet Lake systems into s0ix heuristics
e1000e: Add more Dell CML systems into s0ix heuristics

.../device_drivers/ethernet/intel/e1000e.rst | 23 ++
drivers/net/ethernet/intel/Kconfig | 1 +
drivers/net/ethernet/intel/e1000e/e1000.h | 7 +
drivers/net/ethernet/intel/e1000e/netdev.c | 64 +++---
drivers/net/ethernet/intel/e1000e/param.c | 209 ++++++++++++++++++
5 files changed, 266 insertions(+), 38 deletions(-)


 \ /
  Last update: 2020-09-28 06:41    [W:0.152 / U:1.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site