lkml.org 
[lkml]   [2020]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1] i2c: npcm7xx: Clear LAST bit after a failed transaction.
On Sun, Sep 20, 2020 at 11:48:09PM +0300, Tali Perry wrote:
> Due to a HW issue, in some scenarios the LAST bit might remain set.
> This will cause an unexpected NACK after reading 16 bytes on the next
> read.
>
> Example: if user tries to read from a missing device, get a NACK,
> then if the next command is a long read ( > 16 bytes),
> the master will stop reading after 16 bytes.
> To solve this, if a command fails, check if LAST bit is still
> set. If it does, reset the module.
>
> Fixes: 56a1485b102e (i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver)
> Signed-off-by: Tali Perry <tali.perry1@gmail.com>

Applied to for-current, thanks!

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-09-27 20:07    [W:0.032 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site