lkml.org 
[lkml]   [2020]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/6] arm64: dts: imx8mm-var-som: fix missing PMIC's interrupt line pull-up
Date
The PMIC's interrupt is level low and should be pulled up.  The PMIC's
device node had pinctrl-0 property but it lacked pinctrl-names which
is required to apply the pin configuration. The actual problem in DTS
was pointed out by Felix Radensky from Variscite.

Reported-by: Felix Radensky <felix.r@variscite.com>
Fixes: 5f67317bd967 ("arm64: dts: imx8mm: correct interrupt flags")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
index 4107fe914d08..49082529764f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -135,13 +135,10 @@
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
+ pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio2>;
- /*
- * The interrupt is not correct. It should be level low,
- * however with internal pull up this causes IRQ storm.
- */
- interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;

#clock-cells = <0>;
@@ -398,7 +395,7 @@

pinctrl_pmic: pmicirqgrp {
fsl,pins = <
- MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x41
+ MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x141
>;
};

--
2.17.1
\
 
 \ /
  Last update: 2020-09-27 19:00    [W:0.088 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site