lkml.org 
[lkml]   [2020]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 5/7] Documentation/ABI: Add iei-wt61p803-puzzle driver sysfs interface documentation
I agree, I'll move this over to testing.

These values are stored in the microcontroller EEPROM and can be modified.
Some test units might be shipped with unpopulated MAC address and S/N values
so I exposed this functionality to enable the user to use some
internal value there.

Kind regards,
Luka

On Sat, Sep 26, 2020 at 8:25 PM Marek Behun <marek.behun@nic.cz> wrote:
>
> On Sat, 26 Sep 2020 15:55:12 +0200
> Luka Kovacic <luka.kovacic@sartura.hr> wrote:
>
> > Add the iei-wt61p803-puzzle driver sysfs interface documentation to allow
> > monitoring and control of the microcontroller from user space.
> >
> > Signed-off-by: Luka Kovacic <luka.kovacic@sartura.hr>
> > Cc: Luka Perkov <luka.perkov@sartura.hr>
> > Cc: Robert Marko <robert.marko@sartura.hr>
> > ---
> > .../stable/sysfs-driver-iei-wt61p803-puzzle | 65 +++++++++++++++++++
> > 1 file changed, 65 insertions(+)
> > create mode 100644 Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle
> >
> > diff --git a/Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle b/Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle
> > new file mode 100644
> > index 000000000000..36fca70d66ef
> > --- /dev/null
> > +++ b/Documentation/ABI/stable/sysfs-driver-iei-wt61p803-puzzle
>
> I think this should go to testing, not stable. It should go to stable
> only after it is stable for some time.
>
> > @@ -0,0 +1,65 @@
> > +What: /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/mac_address_*
> > +Date: September 2020
> > +Contact: Luka Kovacic <luka.kovacic@sartura.hr>
> > +Description: Read the internal iEi WT61P803 PUZZLE MCU MAC address values.
> > + These are factory assigned and can be changed.
> > +
> > +What: /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/serial_number
> > +Date: September 2020
> > +Contact: Luka Kovacic <luka.kovacic@sartura.hr>
> > +Description: Read the internal iEi WT61P803 PUZZLE MCU serial number.
> > + This value is factory assigned and can be changed.
> > +
>
> Please use (RO) and (RW) prefixes before the Description, instead of
> writing "This value is read only", i.e.:
> Description: (RO) Internal ... serial number.
>
> JFI: Why can these values be changed? Shouldn't they be burned into OTP?
>
> Marek
>
> > +What: /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/version
> > +Date: September 2020
> > +Contact: Luka Kovacic <luka.kovacic@sartura.hr>
> > +Description: Read the internal iEi WT61P803 PUZZLE MCU version.
> > + This value is read only.
> > +
> > +What: /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/protocol_version
> > +Date: September 2020
> > +Contact: Luka Kovacic <luka.kovacic@sartura.hr>
> > +Description: Read the internal iEi WT61P803 PUZZLE MCU protocol version.
> > + This value is read only.
> > +
> > +What: /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/power_loss_recovery
> > +Date: September 2020
> > +Contact: Luka Kovacic <luka.kovacic@sartura.hr>
> > +Description: Read the iEi WT61P803 PUZZLE MCU power loss recovery value.
> > + This value is read write.
> > + Value mapping: 0 - Always-On, 1 - Always-Off, 2 - Always-AC, 3 - Always-WA
> > +
> > +What: /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/bootloader_mode
> > +Date: September 2020
> > +Contact: Luka Kovacic <luka.kovacic@sartura.hr>
> > +Description: Read whether the MCU is in bootloader mode.
> > + This value is read only.
> > +
> > +What: /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/power_status
> > +Date: September 2020
> > +Contact: Luka Kovacic <luka.kovacic@sartura.hr>
> > +Description: Read the iEi WT61P803 PUZZLE MCU power status. Power status indicates
> > + the power on method.
> > + This value is read only.
> > + Value mapping (bitwise list):
> > + 0x80 - Null
> > + 0x40 - Firmware flag
> > + 0x20 - Power loss detection flag (powered off)
> > + 0x10 - Power loss detection flag (AC mode)
> > + 0x08 - Button power on
> > + 0x04 - WOL power on
> > + 0x02 - RTC alarm power on
> > + 0x01 - AC recover power on
> > +
> > +What: /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/build_info
> > +Date: September 2020
> > +Contact: Luka Kovacic <luka.kovacic@sartura.hr>
> > +Description: Read the iEi WT61P803 PUZZLE MCU firmware build date.
> > + This value is read only.
> > + Format: yyyy/mm/dd hh:mm
> > +
> > +What: /sys/bus/serial/devices/.../iei_wt61p803_puzzle_core/ac_recovery_status
> > +Date: September 2020
> > +Contact: Luka Kovacic <luka.kovacic@sartura.hr>
> > +Description: Read the iEi WT61P803 PUZZLE MCU AC recovery status.
> > + This value is read only.
>

\
 
 \ /
  Last update: 2020-09-27 17:50    [W:0.057 / U:0.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site