lkml.org 
[lkml]   [2020]   [Sep]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 7/7] arm64: dts: marvell: Add a device tree for the iEi Puzzle-M801 board
On Sat, 26 Sep 2020 15:55:14 +0200
Luka Kovacic <luka.kovacic@sartura.hr> wrote:

> + leds {
> + compatible = "gpio-leds";
> + status = "okay";
> + pinctrl-0 = <&cp0_sfpplus_led_pins &cp1_sfpplus_led_pins>;
> + pinctrl-names = "default";
> +
> + led0 {
> + function = LED_FUNCTION_STATUS;
> + label = "p2_act";
> + gpios = <&cp1_gpio1 6 GPIO_ACTIVE_LOW>;
> + };

There should be a dash in LED node name, please pass this dts via
dt_binding_check
led-0 {
...
};

Also why not add the `color` property to the LED? This is DTS for a
specific device, right?
`label` is obsolete. The LED subsystem creates a name in form
[device:]color:function
If this LED should blink for activity on port 2 (is this an ethernet
port?), the function should be LED_FUNCTION_LAN and function-enumerator
should be <2> (or function should be LED_FUNCTION_ACTIVITY, depending
on how the LED subsystem goes forward with this, but certainly not
LED_FUNCTION_STATUS), and trigger-sources should be set to point to the
ethernet port.

Luka, are you willing to change this once we solve this API properly
in LED subsystem?



> + led6 {
> + function = LED_FUNCTION_STATUS;
> + linux,default-trigger = "disk-activity";
> + label = "front-hdd-led";
> + gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
> + };

led-6. LED_FUNCTION_DISK. `label` deprecated.

> + leds {
> + compatible = "iei,wt61p803-puzzle-leds";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@0 {
> + reg = <0>;
> + color = <LED_COLOR_ID_BLUE>;
> + label = "front-power-led";
> + };

Again, `label` is deprecated. Rather use function =
<LED_FUNCTION_POWER>;

Marek

\
 
 \ /
  Last update: 2020-09-26 19:50    [W:0.101 / U:1.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site