lkml.org 
[lkml]   [2020]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/13] x86: Trenchboot secure dynamic launch Linux kernel support
Date
The Trenchboot project focus on boot security has led to the enabling of
the Linux kernel to be directly invocable by the x86 Dynamic Launch
instruction(s) for establishing a Dynamic Root of Trust for Measurement
(DRTM). The dynamic launch will be initiated by a boot loader with
associated support added to it, for example the first targeted boot
loader will be GRUB2. An integral part of establishing the DRTM involves
measuring everything that is intended to be run (kernel image, initrd,
etc) and everything that will configure that kernel to run (command
line, boot params, etc) into specific PCRs, the DRTM PCRs (17-22), in
the TPM. Another key aspect is the dynamic launch is rooted in hardware,
that is to say the hardware (CPU) is what takes the first measurement
for the chain of integrity measurements. On Intel this is done using
the GETSEC instruction provided by Intel's TXT and the SKINIT
instruction provided by AMD's AMD-V. Information on these technologies
can be readily found online. This patchset introduces Intel TXT support.

To enable the kernel to be launched by GETSEC, a stub must be built
into the setup section of the compressed kernel to handle the specific
state that the dynamic launch process leaves the BSP in. This is
analogous to the EFI stub that is found in the same area. Also this stub
must measure everything that is going to be used as early as possible.
This stub code and subsequent code must also deal with the specific
state that the dynamic launch leaves the APs in.

A quick note on terminology. The larger open source project itself is
called Trenchboot, which is hosted on Github (links below). The kernel
feature enabling the use of the x86 technology is referred to as "Secure
Launch" within the kernel code. As such the prefixes sl_/SL_ or
slaunch/SLAUNCH will be seen in the code. The stub code discussed above
is referred to as the SL stub.

The basic flow is:

- Entry from the dynamic launch jumps to the SL stub
- SL stub fixes up the world on the BSP
- For TXT, SL stub wakes the APs, fixes up their worlds
- For TXT, APs are left halted waiting for an NMI to wake them
- SL stub jumps to startup_32
- SL main runs to measure configuration and module information into the
DRTM PCRs. It also locates the TPM event log.
- Kernel boot proceeds normally from this point.
- During early setup, slaunch_setup() runs to finish some validation
and setup tasks.
- The SMP bringup code is modified to wake the waiting APs. APs vector
to rmpiggy and start up normally from that point.
- Kernel boot finishes booting normally
- SL securityfs module is present to allow reading and writing of the
TPM event log.
- SEXIT support to leave SMX mode is present on the kexec path and
the various reboot paths (poweroff, reset, halt).

Links:

The Trenchboot project including documentation:

https://github.com/trenchboot

Intel TXT is documented in its own specification and in the SDM Instruction Set volume:

https://www.intel.com/content/dam/www/public/us/en/documents/guides/intel-txt-software-development-guide.pdf
https://software.intel.com/en-us/articles/intel-sdm

AMD SKINIT is documented in the System Programming manual:

https://www.amd.com/system/files/TechDocs/24593.pdf

GRUB2 pre-launch support patchset (WIP):

https://lists.gnu.org/archive/html/grub-devel/2020-05/msg00011.html

Thanks
Ross Philipson and Daniel P. Smith

Daniel P. Smith (4):
x86: Add early TPM TIS/CRB interface support for Secure Launch
x86: Add early TPM1.2/TPM2.0 interface support for Secure Launch
x86: Add early general TPM interface support for Secure Launch
x86: Secure Launch adding event log securityfs

Ross Philipson (9):
x86: Secure Launch Kconfig
x86: Secure Launch main header file
x86: Add early SHA support for Secure Launch early measurements
x86: Secure Launch kernel early boot stub
x86: Secure Launch kernel late boot stub
x86: Secure Launch SMP bringup support
kexec: Secure Launch kexec SEXIT support
reboot: Secure Launch SEXIT support on reboot paths
tpm: Allow locality 2 to be set when initializing the TPM for Secure
Launch

Documentation/x86/boot.rst | 9 +
arch/x86/Kconfig | 36 ++
arch/x86/boot/compressed/Makefile | 8 +
arch/x86/boot/compressed/early_sha1.c | 104 ++++
arch/x86/boot/compressed/early_sha1.h | 17 +
arch/x86/boot/compressed/early_sha256.c | 6 +
arch/x86/boot/compressed/early_sha512.c | 6 +
arch/x86/boot/compressed/head_64.S | 34 +
arch/x86/boot/compressed/kernel_info.S | 7 +
arch/x86/boot/compressed/sl_main.c | 390 ++++++++++++
arch/x86/boot/compressed/sl_stub.S | 606 ++++++++++++++++++
arch/x86/boot/compressed/tpm/crb.c | 304 +++++++++
arch/x86/boot/compressed/tpm/crb.h | 20 +
arch/x86/boot/compressed/tpm/tis.c | 215 +++++++
arch/x86/boot/compressed/tpm/tis.h | 46 ++
arch/x86/boot/compressed/tpm/tpm.c | 145 +++++
arch/x86/boot/compressed/tpm/tpm.h | 48 ++
arch/x86/boot/compressed/tpm/tpm1.h | 112 ++++
arch/x86/boot/compressed/tpm/tpm1_cmds.c | 99 +++
arch/x86/boot/compressed/tpm/tpm2.h | 89 +++
arch/x86/boot/compressed/tpm/tpm2_auth.c | 44 ++
arch/x86/boot/compressed/tpm/tpm2_auth.h | 21 +
arch/x86/boot/compressed/tpm/tpm2_cmds.c | 145 +++++
arch/x86/boot/compressed/tpm/tpm2_constants.h | 66 ++
arch/x86/boot/compressed/tpm/tpm_buff.c | 121 ++++
arch/x86/boot/compressed/tpm/tpm_common.h | 127 ++++
arch/x86/boot/compressed/tpm/tpmbuff.h | 34 +
arch/x86/boot/compressed/tpm/tpmio.c | 51 ++
arch/x86/include/asm/realmode.h | 3 +
arch/x86/kernel/Makefile | 1 +
arch/x86/kernel/asm-offsets.c | 16 +
arch/x86/kernel/reboot.c | 10 +
arch/x86/kernel/setup.c | 3 +
arch/x86/kernel/slaunch.c | 856 ++++++++++++++++++++++++++
arch/x86/kernel/smpboot.c | 86 +++
arch/x86/realmode/rm/header.S | 3 +
arch/x86/realmode/rm/trampoline_64.S | 37 ++
drivers/char/tpm/tpm-chip.c | 13 +-
drivers/iommu/intel/dmar.c | 4 +
include/linux/sha512.h | 21 +
include/linux/slaunch.h | 544 ++++++++++++++++
kernel/kexec_core.c | 4 +
lib/sha1.c | 4 +
lib/sha512.c | 209 +++++++
44 files changed, 4722 insertions(+), 2 deletions(-)
create mode 100644 arch/x86/boot/compressed/early_sha1.c
create mode 100644 arch/x86/boot/compressed/early_sha1.h
create mode 100644 arch/x86/boot/compressed/early_sha256.c
create mode 100644 arch/x86/boot/compressed/early_sha512.c
create mode 100644 arch/x86/boot/compressed/sl_main.c
create mode 100644 arch/x86/boot/compressed/sl_stub.S
create mode 100644 arch/x86/boot/compressed/tpm/crb.c
create mode 100644 arch/x86/boot/compressed/tpm/crb.h
create mode 100644 arch/x86/boot/compressed/tpm/tis.c
create mode 100644 arch/x86/boot/compressed/tpm/tis.h
create mode 100644 arch/x86/boot/compressed/tpm/tpm.c
create mode 100644 arch/x86/boot/compressed/tpm/tpm.h
create mode 100644 arch/x86/boot/compressed/tpm/tpm1.h
create mode 100644 arch/x86/boot/compressed/tpm/tpm1_cmds.c
create mode 100644 arch/x86/boot/compressed/tpm/tpm2.h
create mode 100644 arch/x86/boot/compressed/tpm/tpm2_auth.c
create mode 100644 arch/x86/boot/compressed/tpm/tpm2_auth.h
create mode 100644 arch/x86/boot/compressed/tpm/tpm2_cmds.c
create mode 100644 arch/x86/boot/compressed/tpm/tpm2_constants.h
create mode 100644 arch/x86/boot/compressed/tpm/tpm_buff.c
create mode 100644 arch/x86/boot/compressed/tpm/tpm_common.h
create mode 100644 arch/x86/boot/compressed/tpm/tpmbuff.h
create mode 100644 arch/x86/boot/compressed/tpm/tpmio.c
create mode 100644 arch/x86/kernel/slaunch.c
create mode 100644 include/linux/sha512.h
create mode 100644 include/linux/slaunch.h
create mode 100644 lib/sha512.c

--
1.8.3.1

\
 
 \ /
  Last update: 2020-09-24 17:02    [W:0.019 / U:4.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site