lkml.org 
[lkml]   [2020]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/8] arm64: dts: meson: remove reset-gpios from ethernet node for VIM2 meson-gxm-khadas-vim2
Date
1) fix down/up ethernet interface - need remove reset-gpios for ethernet node

`ifconfig eth0 down && ifconfig eth0 up` # didnt works with reset-gpios

2) add max-speed 1Gbit

Signed-off-by: Artem Lapkin <art@khadas.com>
---
arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index a6baf865aa2..70343da2811 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -195,7 +195,7 @@ external_phy: ethernet-phy@0 {

reset-assert-us = <10000>;
reset-deassert-us = <30000>;
- reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+ max-speed = <1000>;

interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_15 */
--
2.25.1
\
 
 \ /
  Last update: 2020-09-25 05:32    [W:0.153 / U:26.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site