lkml.org 
[lkml]   [2020]   [Sep]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 5/6] dt-bindings: dw-apb-ictl: convert to json-schema
From
Date


On 2020/9/24 11:26, Leizhen (ThunderTown) wrote:
>
>
> On 2020/9/24 4:49, Rob Herring wrote:
>> On Fri, Sep 18, 2020 at 07:22:01PM +0800, Zhen Lei wrote:
>>> Convert the Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
>>> binding to DT schema format using json-schema.
>>>
>>> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
>>> ---
>>> .../interrupt-controller/snps,dw-apb-ictl.txt | 43 -------------
>>> .../interrupt-controller/snps,dw-apb-ictl.yaml | 75 ++++++++++++++++++++++
>>> 2 files changed, 75 insertions(+), 43 deletions(-)
>>> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
>>> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
>>> deleted file mode 100644
>>> index 2db59df9408f4c6..000000000000000
>>> --- a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
>>> +++ /dev/null
>>> @@ -1,43 +0,0 @@
>>> -Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
>>> -
>>> -Synopsys DesignWare provides interrupt controller IP for APB known as
>>> -dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
>>> -APB bus, e.g. Marvell Armada 1500. It can also be used as primary interrupt
>>> -controller in some SoCs, e.g. Hisilicon SD5203.
>>> -
>>> -Required properties:
>>> -- compatible: shall be "snps,dw-apb-ictl"
>>> -- reg: physical base address of the controller and length of memory mapped
>>> - region starting with ENABLE_LOW register
>>> -- interrupt-controller: identifies the node as an interrupt controller
>>> -- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
>>> -
>>> -Additional required property when it's used as secondary interrupt controller:
>>> -- interrupts: interrupt reference to primary interrupt controller
>>> -
>>> -The interrupt sources map to the corresponding bits in the interrupt
>>> -registers, i.e.
>>> -- 0 maps to bit 0 of low interrupts,
>>> -- 1 maps to bit 1 of low interrupts,
>>> -- 32 maps to bit 0 of high interrupts,
>>> -- 33 maps to bit 1 of high interrupts,
>>> -- (optional) fast interrupts start at 64.
>>> -
>>> -Example:
>>> - /* dw_apb_ictl is used as secondary interrupt controller */
>>> - aic: interrupt-controller@3000 {
>>> - compatible = "snps,dw-apb-ictl";
>>> - reg = <0x3000 0xc00>;
>>> - interrupt-controller;
>>> - #interrupt-cells = <1>;
>>> - interrupt-parent = <&gic>;
>>> - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
>>> - };
>>> -
>>> - /* dw_apb_ictl is used as primary interrupt controller */
>>> - vic: interrupt-controller@10130000 {
>>> - compatible = "snps,dw-apb-ictl";
>>> - reg = <0x10130000 0x1000>;
>>> - interrupt-controller;
>>> - #interrupt-cells = <1>;
>>> - };
>>> diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml
>>> new file mode 100644
>>> index 000000000000000..70c12979c843bf0
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.yaml
>>> @@ -0,0 +1,75 @@
>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/interrupt-controller/snps,dw-apb-ictl.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
>>> +
>>> +maintainers:
>>> + - Marc Zyngier <marc.zyngier@arm.com>
>>
>> Usually this would be an owner for this IP block, not the subsystem
>> maintainer.
>
> OK, I will change it to the author of the file "snps,dw-apb-ictl.txt".
>
>
>>
>>> +
>>> +description:
>>> + Synopsys DesignWare provides interrupt controller IP for APB known as
>>> + dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs
>>> + with APB bus, e.g. Marvell Armada 1500. It can also be used as primary
>>> + interrupt controller in some SoCs, e.g. Hisilicon SD5203.
>>> +
>>> +allOf:
>>> + - $ref: /schemas/interrupt-controller.yaml#
>>
>> You can drop this, it's already applied based on node name.
> But if we drop this, the "snps,dw-apb-ictl.yaml" can not require that the node name
> must match '^interrupt-controller(@[0-9a-f,]+)*$'. The problem of Patch 6/6 was
> discovered by this.
>
>>
>>> +
>>> +properties:
>>> + compatible:
>>> + const: snps,dw-apb-ictl
>>> +
>>> + interrupt-controller: true
>>> +
>>> + reg:
>>> + description:
>>> + Physical base address of the controller and length of memory mapped
>>> + region starting with ENABLE_LOW register.
>>
>> Need to define how many reg regions (maxItems: 1).
>
> OK, I will add it.
>
>>
>>> +
>>> + interrupts:
>>> + description:
>>> + Interrupt reference to primary interrupt controller.
>>> +
>>> + The interrupt sources map to the corresponding bits in the interrupt
>>> + registers, i.e.
>>> + - 0 maps to bit 0 of low interrupts,
>>> + - 1 maps to bit 1 of low interrupts,
>>> + - 32 maps to bit 0 of high interrupts,
>>> + - 33 maps to bit 1 of high interrupts,
>>> + - (optional) fast interrupts start at 64.
>>> + minItems: 1
>>> + maxItems: 65
>>
>> 65 connections to the primary interrupt controller? I think this is for
>> the child interrupts? If so, move to #interrupt-cells description
>> instead.
> Oh, yes. The property "interrupts" here describes which interrupts are used in the
> primary interrupt controller. We don't known how many will be connected but at least one.
> I will remove "maxItems: 65", it's my mistake.

Oh, I think I should change "minItems: 1" to "maxItems: 1" further, because there is only one
connection currently.

>
> Property "#interrupt-cells" describes how many cells of one "interrupts" item. So I will
> move these descriptions under the top property "properties:"
>
>>
>>> +
>>> + "#interrupt-cells":
>>> + description:
>>> + Number of cells to encode an interrupt-specifier.
>>
>> Drop. No need to redefine common properties.
>
> This is useful. See below, I add "const: 1" to require that the value of
> "#interrupt-cells" can only be one.
>
> #interrupt-cells = <1>;
>
> I followed the description in "snps,dw-apb-ictl.txt".
> -- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
>
>>
>>> + const: 1
>>> +
>>> +required:
>>> + - compatible
>>> + - reg
>>> + - interrupt-controller
>>> + - '#interrupt-cells'
>>> +
>>> +examples:
>>> + - |
>>> + /* dw_apb_ictl is used as secondary interrupt controller */
>>> + aic: interrupt-controller@3000 {
>>> + compatible = "snps,dw-apb-ictl";
>>> + reg = <0x3000 0xc00>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <1>;
>>> + interrupt-parent = <&gic>;
>>> + interrupts = <0 3 4>;
>>> + };
>>> +
>>> + /* dw_apb_ictl is used as primary interrupt controller */
>>> + vic: interrupt-controller@10130000 {
>>> + compatible = "snps,dw-apb-ictl";
>>> + reg = <0x10130000 0x1000>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <1>;
>>> + };
>>> --
>>> 1.8.3
>>>
>>>
>>
>> .
>>

\
 
 \ /
  Last update: 2020-09-24 06:18    [W:0.064 / U:4.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site