lkml.org 
[lkml]   [2020]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [Intel-wired-lan] [PATCH] e1000e: Power cycle phy on PM resume
Date
Dear Kai-Heng,


Am 23.09.20 um 09:47 schrieb Kai-Heng Feng:
> We are seeing the following error after S3 resume:
> [ 704.746874] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
> [ 704.844232] e1000e 0000:00:1f.6 eno1: MDI Write did not complete
> [ 704.902817] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
> [ 704.903075] e1000e 0000:00:1f.6 eno1: reading PHY page 769 (or 0x6020 shifted) reg 0x17
> [ 704.903281] e1000e 0000:00:1f.6 eno1: Setting page 0x6020
> [ 704.903486] e1000e 0000:00:1f.6 eno1: writing PHY page 769 (or 0x6020 shifted) reg 0x17
> [ 704.943155] e1000e 0000:00:1f.6 eno1: MDI Error
> ...
> [ 705.108161] e1000e 0000:00:1f.6 eno1: Hardware Error
>
> Since we don't know what platform firmware may do to the phy, so let's
> power cycle the phy upon system resume to resolve the issue.

Is there a bug report or list thread for this issue?

> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> ---
> drivers/net/ethernet/intel/e1000e/netdev.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
> index 664e8ccc88d2..c2a87a408102 100644
> --- a/drivers/net/ethernet/intel/e1000e/netdev.c
> +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
> @@ -6968,6 +6968,8 @@ static __maybe_unused int e1000e_pm_resume(struct device *dev)
> !e1000e_check_me(hw->adapter->pdev->device))
> e1000e_s0ix_exit_flow(adapter);
>
> + e1000_power_down_phy(adapter);
> +
> rc = __e1000_resume(pdev);
> if (rc)
> return rc;

How much does this increase the resume time?


Kind regards,

Paul

\
 
 \ /
  Last update: 2020-09-23 15:37    [W:0.160 / U:1.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site