lkml.org 
[lkml]   [2020]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/2] Input: atmel_mxt_ts - wake mXT1386 from deep-sleep mode
From
Date
Hi Dmitry

On 2020/09/20 15:02, Dmitry Torokhov wrote:
> On Sat, Sep 19, 2020 at 10:28 PM Wang, Jiada <jiada_wang@mentor.com> wrote:
>>
>> Hi Dmitry
>>
>> On 2020/09/20 4:49, Dmitry Osipenko wrote:
>>> 18.09.2020 18:55, Wang, Jiada пишет:
>>> ...
>>>>>> +static void mxt_wake(struct mxt_data *data)
>>>>>> +{
>>>>>> + struct i2c_client *client = data->client;
>>>>>> + struct device *dev = &data->client->dev;
>>>>>> + struct device_node *np = dev->of_node;
>>>>>> + union i2c_smbus_data dummy;
>>>>>> +
>>>>>> + if (!of_device_is_compatible(np, "atmel,mXT1386"))
>>>>>> + return;
>>>>> I'm not sure whether you misses the previous answers from Dmitry
>>>>> Torokhov and Rob Herring, but they suggested to add a new device-tree
>>>>> property which should specify the atmel,wakeup-method.
>>>>>
>>>> I think Rob Herring prefers for the compatible solution than property.
>>>
>>> Actually, seems you're right. But I'm not sure now whether he just made
>>> a typo, because it's actually a board-specific option.
>>>
>> Right, I think since it is a board specific issue,
>> so "property" is the preferred way,
>
> Why are you saying it is a board-specific issue? It seems to me that
> it is behavior of a given controller, not behavior of a board that
> happens to use such a controller?
>

the issue only occurs on mXT1386 controller,
but with same mXT1386 soc, behavior differs from how WAKE line is
connected, (left low, connect to GPIO or connect to SCL),
so I think the issue also is board-specific?

>> if I understand you correctly,
>> compatible combine with property is what you are suggesting, right?
>
> We should gate the behavior either off a compatible or a new property,
> but not both.
>
>>
>>> It could be more preferred to skip the i2c_smbus_xfer() for the NONE
>>> variant, but it also should be harmless in practice. I guess we indeed
>>> could keep the current variant of yours patch and then add a clarifying
>>> comment to the commit message and to the code, telling that
>>> i2c_smbus_xfer() is harmless in a case of the hardwired WAKE-LINE.
>>>
>> I will skip dummy read for "NONE" variant.
>>
>>>>> There are 3 possible variants:
>>>>>
>>>>> - NONE
>>>>> - GPIO
>>>>> - I2C-SCL
>>>>>
>>>>> Hence we should bail out from mxt_wake() if method is set to NONE or
>>>>> GPIO.
>>>>>
>>>> for "GPIO", we still need 25 ms sleep. but rather than a dummy read,
>>>> WAKE line need to be asserted before sleep.
>>>
>>> Correct, I just meant to bail out because GPIO is currently unsupported.
>>>
>>
>> OK
>>
>>> ...
>>>>>> static int mxt_initialize(struct mxt_data *data)
>>>>>> {
>>>>>> struct i2c_client *client = data->client;
>>>>>> int recovery_attempts = 0;
>>>>>> int error;
>>>>>> + mxt_wake(data);
>>>>>> +
>>>>>> while (1) {
>>>>>
>>>>> I assume the mxt_wake() should be placed here, since there is a 3
>>>>> seconds timeout in the end of the while-loop, meaning that device may
>>>>> get back into deep-sleep on a retry.
>>>>>
>>>> Can you elaborate a little more why exit from bootload mode after sleep
>>>> for 3 second could enter deep-sleep mode.
>>>
>>> The loop attempts to exit from bootload mode and then I suppose
>>> mxt_read_info_block() may fail if I2C "accidentally" fails, hence the
>>> deep-sleep mode still will be enabled on a retry.
>
> If the controller is in bootloader mode it will not be in a deep sleep
> mode. If the controller was just reset via reset GPIO it will not be
> in deep sleep mode. The controller can only be in deep sleep mode if
> someone requested deep sleep mode. I'd recommend moving the mxt_wake
> in the "else" case of handling reset GPIO.
>

OK.

Thanks,
Jiada
> Thanks,
>

\
 
 \ /
  Last update: 2020-09-20 15:14    [W:0.071 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site