[lkml]   [2020]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 1/3] pinctrl: mvebu: Fix i2c sda definition for 98DX3236
On Mon, Sep 7, 2020 at 11:17 PM Chris Packham
<> wrote:

> Per the datasheet the i2c functions use MPP_Sel=0x1. They are documented
> as using MPP_Sel=0x4 as well but mixing 0x1 and 0x4 is clearly wrong. On
> the board tested 0x4 resulted in a non-functioning i2c bus so stick with
> 0x1 which works.
> Fixes: d7ae8f8dee7f ("pinctrl: mvebu: pinctrl driver for 98DX3236 SoC")
> Signed-off-by: Chris Packham <>
> Reviewed-by: Andrew Lunn <>

This patch 1/3 applied for pin control fixes.

Patches 2 & 3 should go via the SoC tree.

Linus Walleij

 \ /
  Last update: 2020-09-12 18:17    [W:0.055 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site