[lkml]   [2020]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 00/14] Adding GAUDI NIC code to habanalabs driver

This is the second version of the patch-set to upstream the GAUDI NIC code
into the habanalabs driver.

Modifications were made following reviews of the first version and are
detailed in the commit message of each patch that was changed.

A general note I want to write here is that I removed the debugfs patch
completely as the feedback was it is not acceptable to add debugfs
entries for configuration in netdev.

The original cover letter is attached here for people who didn't read the
first patch-set:

This patch-set adds support for initializing and using the GAUDI NIC ports,
functioning as scale-out interconnect when doing distributed Deep Learning
training. The training can be performed over tens of thousands of GAUDIs
and it is done using the RDMA-over-converged-Ethernet (RoCE) v2 protocol.

Each GAUDI exposes 10x100GbE ports that are designed to scale-out the
inter-GAUDI communication by integrating a complete communication engine
on-die. This native integration allows users to use the same scaling
technology, both inside the server and rack (termed as scale-up), as well
as for scaling across racks (scale-out). The racks can be connected
directly between GAUDI processors, or through any number of standard
Ethernet switches.

The driver exposes the NIC ports to the user as standard Ethernet ports by
registering each port to the networking subsystem. This allows the user to
manage the ports with standard tools such as ifconfig, ethtool, etc. It
also enables us to connect to the Linux networking stack and thus support
standard networking protocols, such as IPv4, IPv6, TCP, etc. In addition,
we can also leverage protocols such as DCB for dynamically configuring
priorities to avoid congestion.

For each NIC port there is a matching QMAN entity. For RoCE, the user
submits workloads to the NIC through the QMAN, same as he does for the
compute engines. For regular Ethernet, the user sends and receives packets
through the standard Ethernet sockets. Those sockets are used only as a
control path. The data path that is used for AI training goes through the
RoCE interface.

It is important to note that there are some limitations and uniqueness
in GAUDI's NIC H/W, compared to other networking adapters that enforced us
to use a less-than-common driver design:

1. The NIC functionality is NOT exposed as different PCI Physical
Functions. There is a single PF which is used for compute and
networking, as the main goal of the NIC ports is to be used as
intra-communication and not as standard network interfaces. This
implies we can't connect different drivers to handle the networking
ports because it is the same device, from the kernel POV, as the
compute. Therefore, we must integrate the networking code into the
main habanalabs driver.

2. Although our communication engine implements RDMA, and the driver code
uses well-known RDMA concepts such as QP context, CQ, WQ, etc., the
GAUDI architecture does NOT support other basic IBverbs concepts, such
as MR and protection domain. Therefore, we can't connect to the standard
IBverb infrastructure in the user-space and kernel (rdma-core library
and infiniband subsystem, respectively) because the standard RDMA s/w
and tools won't work on our H/W. Instead, we added a new IOCTL to the
driver's existing IOCTL API. The new IOCTL exposes the available
NIC control operations to the user (e.g. Create a QP context).

3. The die-on communication engine provides minimal offloading for standard
Ethernet and TCP/IP protocols, as those are only used for control plane.
E.g. the packets are copied rather than using descriptors.
Therefore, the Ethernet performance is quite low compared to standard
Ethernet adapters.

4. There is no virtualization support per port.

Most or all of the above limitations will hopefully be improved in future
ASIC generations.

Patch-set organization:

- Patches 1 & 2 are just adding some auto-generated register header files
and NIC-related definitions to the interface between the driver and the
GAUDI firmware.

- Patch 3 adds initialization of security restrictions on the NIC engines.

- Patch 4 adds initialization of the NIC QMANs. The QMANs are needed to
send RDMA packets through the NIC engines.

- Patches 5-11 adds the NIC driver code. It contains the basic Ethernet
driver and H/W initialization, the NIC PHY driver code and the new NIC
control IOCTL operations.

- Patch 12-13 adds support for ethtool and DCB.

- Patch 14 adds the implementation of the high-level init/fini functions
and their calls from the common code. This is the patch that actually
enables the NIC ports and allows the user to work with them.


Omer Shpigelman (14):
habanalabs/gaudi: add NIC H/W and registers definitions
habanalabs/gaudi: add NIC firmware-related definitions
habanalabs/gaudi: add NIC security configuration
habanalabs/gaudi: add support for NIC QMANs
habanalabs/gaudi: add NIC Ethernet support
habanalabs/gaudi: add NIC PHY code
habanalabs/gaudi: allow user to get MAC addresses in INFO IOCTL
habanalabs/gaudi: add a new IOCTL for NIC control operations
habanalabs/gaudi: add CQ control operations
habanalabs/gaudi: add WQ control operations
habanalabs/gaudi: add QP error handling
habanalabs/gaudi: Add ethtool support using coresight
habanalabs/gaudi: support DCB protocol
habanalabs/gaudi: add NIC init/fini calls from common code

drivers/misc/habanalabs/common/context.c | 1 +
drivers/misc/habanalabs/common/device.c | 24 +-
drivers/misc/habanalabs/common/firmware_if.c | 44 +
drivers/misc/habanalabs/common/habanalabs.h | 33 +-
.../misc/habanalabs/common/habanalabs_drv.c | 5 +
.../misc/habanalabs/common/habanalabs_ioctl.c | 151 +-
drivers/misc/habanalabs/common/pci.c | 1 +
drivers/misc/habanalabs/gaudi/Makefile | 3 +
drivers/misc/habanalabs/gaudi/gaudi.c | 957 +++-
drivers/misc/habanalabs/gaudi/gaudiP.h | 331 +-
.../misc/habanalabs/gaudi/gaudi_coresight.c | 144 +
drivers/misc/habanalabs/gaudi/gaudi_nic.c | 4093 +++++++++++++++++
drivers/misc/habanalabs/gaudi/gaudi_nic.h | 353 ++
.../misc/habanalabs/gaudi/gaudi_nic_dcbnl.c | 108 +
.../misc/habanalabs/gaudi/gaudi_nic_ethtool.c | 613 +++
drivers/misc/habanalabs/gaudi/gaudi_phy.c | 1276 +++++
.../misc/habanalabs/gaudi/gaudi_security.c | 3973 ++++++++++++++++
drivers/misc/habanalabs/goya/goya.c | 44 +
.../misc/habanalabs/include/common/cpucp_if.h | 34 +-
.../include/gaudi/asic_reg/gaudi_regs.h | 26 +-
.../include/gaudi/asic_reg/nic0_qm0_masks.h | 800 ++++
.../include/gaudi/asic_reg/nic0_qm0_regs.h | 834 ++++
.../include/gaudi/asic_reg/nic0_qm1_regs.h | 834 ++++
.../include/gaudi/asic_reg/nic0_qpc0_masks.h | 500 ++
.../include/gaudi/asic_reg/nic0_qpc0_regs.h | 710 +++
.../include/gaudi/asic_reg/nic0_qpc1_regs.h | 710 +++
.../include/gaudi/asic_reg/nic0_rxb_regs.h | 508 ++
.../include/gaudi/asic_reg/nic0_rxe0_masks.h | 354 ++
.../include/gaudi/asic_reg/nic0_rxe0_regs.h | 158 +
.../include/gaudi/asic_reg/nic0_rxe1_regs.h | 158 +
.../include/gaudi/asic_reg/nic0_stat_regs.h | 518 +++
.../include/gaudi/asic_reg/nic0_tmr_regs.h | 184 +
.../include/gaudi/asic_reg/nic0_txe0_masks.h | 336 ++
.../include/gaudi/asic_reg/nic0_txe0_regs.h | 264 ++
.../include/gaudi/asic_reg/nic0_txe1_regs.h | 264 ++
.../include/gaudi/asic_reg/nic0_txs0_masks.h | 336 ++
.../include/gaudi/asic_reg/nic0_txs0_regs.h | 214 +
.../include/gaudi/asic_reg/nic0_txs1_regs.h | 214 +
.../include/gaudi/asic_reg/nic1_qm0_regs.h | 834 ++++
.../include/gaudi/asic_reg/nic1_qm1_regs.h | 834 ++++
.../include/gaudi/asic_reg/nic2_qm0_regs.h | 834 ++++
.../include/gaudi/asic_reg/nic2_qm1_regs.h | 834 ++++
.../include/gaudi/asic_reg/nic3_qm0_regs.h | 834 ++++
.../include/gaudi/asic_reg/nic3_qm1_regs.h | 834 ++++
.../include/gaudi/asic_reg/nic4_qm0_regs.h | 834 ++++
.../include/gaudi/asic_reg/nic4_qm1_regs.h | 834 ++++
drivers/misc/habanalabs/include/gaudi/gaudi.h | 12 +
.../habanalabs/include/gaudi/gaudi_fw_if.h | 24 +
.../habanalabs/include/gaudi/gaudi_masks.h | 15 +
.../include/hw_ip/nic/nic_general.h | 13 +
include/uapi/misc/habanalabs.h | 296 +-
51 files changed, 27080 insertions(+), 62 deletions(-)
create mode 100644 drivers/misc/habanalabs/gaudi/gaudi_nic.c
create mode 100644 drivers/misc/habanalabs/gaudi/gaudi_nic.h
create mode 100644 drivers/misc/habanalabs/gaudi/gaudi_nic_dcbnl.c
create mode 100644 drivers/misc/habanalabs/gaudi/gaudi_nic_ethtool.c
create mode 100644 drivers/misc/habanalabs/gaudi/gaudi_phy.c
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_qm0_masks.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_qm0_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_qm1_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_qpc0_masks.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_qpc0_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_qpc1_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_rxb_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_rxe0_masks.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_rxe0_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_rxe1_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_stat_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_tmr_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_txe0_masks.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_txe0_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_txe1_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_txs0_masks.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_txs0_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic0_txs1_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic1_qm0_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic1_qm1_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic2_qm0_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic2_qm1_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic3_qm0_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic3_qm1_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic4_qm0_regs.h
create mode 100644 drivers/misc/habanalabs/include/gaudi/asic_reg/nic4_qm1_regs.h
create mode 100644 drivers/misc/habanalabs/include/hw_ip/nic/nic_general.h


 \ /
  Last update: 2020-09-12 16:42    [W:0.098 / U:5.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site