lkml.org 
[lkml]   [2020]   [Sep]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 8/9] clocksource: sp804: enable Hisilicon sp804 timer 64bit mode
Date
A 100MHZ 32-bit timer will be wrapped up less than 43s. Although the
kernel maintains a software high 32-bit count in the tick IRQ. But it's
not applicable to the user mode APPs.

Note: The kernel still uses the lower 32 bits of the timer.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
drivers/clocksource/timer-sp.h | 9 +++++++++
drivers/clocksource/timer-sp804.c | 8 ++++++++
2 files changed, 17 insertions(+)

diff --git a/drivers/clocksource/timer-sp.h b/drivers/clocksource/timer-sp.h
index 6ca8d82e8544..6c0a902926eb 100644
--- a/drivers/clocksource/timer-sp.h
+++ b/drivers/clocksource/timer-sp.h
@@ -35,22 +35,28 @@
#define HISI_TIMER_1_BASE 0x00
#define HISI_TIMER_2_BASE 0x40
#define HISI_TIMER_LOAD 0x00
+#define HISI_TIMER_LOAD_H 0x04
#define HISI_TIMER_VALUE 0x08
+#define HISI_TIMER_VALUE_H 0x0c
#define HISI_TIMER_CTRL 0x10
#define HISI_TIMER_INTCLR 0x14
#define HISI_TIMER_RIS 0x18
#define HISI_TIMER_MIS 0x1c
#define HISI_TIMER_BGLOAD 0x20
+#define HISI_TIMER_BGLOAD_H 0x24


struct sp804_timer {
int load;
+ int load_h;
int value;
+ int value_h;
int ctrl;
int intclr;
int ris;
int mis;
int bgload;
+ int bgload_h;
int timer_base[NR_TIMERS];
int width;
};
@@ -58,12 +64,15 @@ struct sp804_timer {
struct sp804_clkevt {
void __iomem *base;
void __iomem *load;
+ void __iomem *load_h;
void __iomem *value;
+ void __iomem *value_h;
void __iomem *ctrl;
void __iomem *intclr;
void __iomem *ris;
void __iomem *mis;
void __iomem *bgload;
+ void __iomem *bgload_h;
unsigned long reload;
int width;
};
diff --git a/drivers/clocksource/timer-sp804.c b/drivers/clocksource/timer-sp804.c
index 3049f558c49b..8d16e7fa7a7a 100644
--- a/drivers/clocksource/timer-sp804.c
+++ b/drivers/clocksource/timer-sp804.c
@@ -31,7 +31,9 @@ struct sp804_timer __initdata arm_sp804_timer = {

struct sp804_timer __initdata hisi_sp804_timer = {
.load = HISI_TIMER_LOAD,
+ .load_h = HISI_TIMER_LOAD_H,
.value = HISI_TIMER_VALUE,
+ .value_h = HISI_TIMER_VALUE_H,
.ctrl = HISI_TIMER_CTRL,
.intclr = HISI_TIMER_INTCLR,
.timer_base = {HISI_TIMER_1_BASE, HISI_TIMER_2_BASE},
@@ -117,6 +119,10 @@ int __init sp804_clocksource_and_sched_clock_init(void __iomem *base,
writel(0, clkevt->ctrl);
writel(0xffffffff, clkevt->load);
writel(0xffffffff, clkevt->value);
+ if (clkevt->width == 64) {
+ writel(0xffffffff, clkevt->load_h);
+ writel(0xffffffff, clkevt->value_h);
+ }
writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
clkevt->ctrl);

@@ -233,7 +239,9 @@ static void __init sp804_clkevt_init(struct sp804_timer *timer, void __iomem *ba
clkevt = &sp804_clkevt[i];
clkevt->base = timer_base;
clkevt->load = timer_base + timer->load;
+ clkevt->load_h = timer_base + timer->load_h;
clkevt->value = timer_base + timer->value;
+ clkevt->value_h = timer_base + timer->value_h;
clkevt->ctrl = timer_base + timer->ctrl;
clkevt->intclr = timer_base + timer->intclr;
clkevt->width = timer->width;
--
2.26.0.106.g9fadedd

\
 
 \ /
  Last update: 2020-09-12 13:48    [W:0.086 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site