lkml.org 
[lkml]   [2020]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 02/24] endian.3: Use 'PRIx32' rather than "%x" when printing 'uint32_t' values
Date
Signed-off-by: Alejandro Colomar <colomar.6.4.3@gmail.com>
---
man3/endian.3 | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/man3/endian.3 b/man3/endian.3
index bdf1efd7e..3a898bb02 100644
--- a/man3/endian.3
+++ b/man3/endian.3
@@ -147,6 +147,7 @@ htobe32(x.u32) = 0x11223344
\&
.EX
#include <endian.h>
+#include <inttypes.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
@@ -164,9 +165,9 @@ main(int argc, char *argv[])
x.arr[2] = 0x33;
x.arr[3] = 0x44; /* Highest-address byte */

- printf("x.u32 = 0x%x\en", x.u32);
- printf("htole32(x.u32) = 0x%x\en", htole32(x.u32));
- printf("htobe32(x.u32) = 0x%x\en", htobe32(x.u32));
+ printf("x.u32 = 0x%"PRIx32"\en", x.u32);
+ printf("htole32(x.u32) = 0x%"PRIx32"\en", htole32(x.u32));
+ printf("htobe32(x.u32) = 0x%"PRIx32"\en", htobe32(x.u32));

exit(EXIT_SUCCESS);
}
--
2.28.0
\
 
 \ /
  Last update: 2020-09-10 23:16    [W:0.861 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site