[lkml]   [2020]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v5 0/3] IMX274 fixes and power on and off implementation
This patch series includes
- Fix for proper Y_OUT_SIZE register configuration.
- Power on/off sequence implementation through runtime PM.
- dt-binding doc to add optional input clock and supplies

Delta between patch versions:
[v5]: Includes below v4 feedback
- dt-bindings patch to add optional clock and supplies and
rebased on below json-schema patch.
- Other minor v4 feedbacks.

[v4]: Includes below v3 feedback
- Implemented power on/off through Runtime PM.
- Use regulator bulk APIs.
- Use lower case for supply names.

[v3]: Includes below v2 feedback
- Removed explicit clk_set_rate from driver as default external
input clock rate can be configured through DT.

[v2]: Includes below changes based on v1 feedback
- External input clock name changed from xclk to inck.
- implementation change for get regulators to store all in array.
- To keep in reset low prior to regulators power on.

Sowjanya Komatineni (3):
media: i2c: imx274: Fix Y_OUT_SIZE register setting
dt-bindings: media: imx274: Add optional input clock and supplies
media: i2c: imx274: Add IMX274 power on and off sequence

.../devicetree/bindings/media/i2c/sony,imx274.yaml | 21 ++++
drivers/media/i2c/imx274.c | 136 ++++++++++++++++++++-
2 files changed, 153 insertions(+), 4 deletions(-)


 \ /
  Last update: 2020-09-02 04:06    [W:0.101 / U:0.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site