[lkml]   [2020]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v8 0/4] scsi: ufs: Add Host Performance Booster Support

v7 -> v8
Remove wrongly added tags.

v6 -> v7
1. Remove UFS feature layer.
2. Cleanup for sparse error.

v5 -> v6
Change base commit to b53293fa662e28ae0cdd40828dc641c09f133405

v4 -> v5
Delete unused macro define.

v3 -> v4
1. Cleanup.

v2 -> v3
1. Add checking input module parameter value.
2. Change base commit from 5.8/scsi-queue to 5.9/scsi-queue.
3. Cleanup for unused variables and label.

v1 -> v2
1. Change the full boilerplate text to SPDX style.
2. Adopt dynamic allocation for sub-region data structure.
3. Cleanup.

NAND flash memory-based storage devices use Flash Translation Layer (FTL)
to translate logical addresses of I/O requests to corresponding flash
memory addresses. Mobile storage devices typically have RAM with
constrained size, thus lack in memory to keep the whole mapping table.
Therefore, mapping tables are partially retrieved from NAND flash on
demand, causing random-read performance degradation.

To improve random read performance, JESD220-3 (HPB v1.0) proposes HPB
(Host Performance Booster) which uses host system memory as a cache for the
FTL mapping table. By using HPB, FTL data can be read from host memory
faster than from NAND flash memory.

The current version only supports the DCM (device control mode).
This patch consists of 3 parts to support HPB feature.

1) HPB probe and initialization process
2) READ -> HPB READ using cached map information
3) L2P (logical to physical) map management

In the HPB probe and init process, the device information of the UFS is
queried. After checking supported features, the data structure for the HPB
is initialized according to the device information.

A read I/O in the active sub-region where the map is cached is changed to
HPB READ by the HPB.

The HPB manages the L2P map using information received from the
device. For active sub-region, the HPB caches through ufshpb_map
request. For the in-active region, the HPB discards the L2P map.
When a write I/O occurs in an active sub-region area, associated dirty
bitmap checked as dirty for preventing stale read.

HPB is shown to have a performance improvement of 58 - 67% for random read
workload. [1]

This series patches are based on the 5.9/scsi-queue branch.


Daejun park (4):
scsi: ufs: Add UFS feature related parameter
scsi: ufs: Introduce HPB feature
scsi: ufs: L2P map management for HPB read
scsi: ufs: Prepare HPB read for cached sub-region

drivers/scsi/ufs/Kconfig | 18 +
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/ufs.h | 12 +
drivers/scsi/ufs/ufshcd.c | 42 +
drivers/scsi/ufs/ufshcd.h | 9 +
drivers/scsi/ufs/ufshpb.c | 1926 ++++++++++++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufshpb.h | 241 +++++
7 files changed, 2249 insertions(+)
created mode 100644 drivers/scsi/ufs/ufshpb.c
created mode 100644 drivers/scsi/ufs/ufshpb.h

 \ /
  Last update: 2020-08-06 10:59    [W:0.142 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site