lkml.org 
[lkml]   [2020]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] brcmfmac: set F2 SDIO block size to 128 bytes for BCM4329
Date
Setting F2 block size to 128 bytes for BCM4329 allows to significantly
improve RX throughput on NVIDIA Tegra20. Before this change the throughput
was capped to 30 Mbit/s on Tegra, now throughput is at 40 Mbit/s, which is
a maximum throughput for the BCM4329 chip. The F2 block size is borrowed
from the downstream BCMDHD driver. The comment in the BCMDHD driver says
that 128B improves throughput and turns out that it works for the brcmfmac
as well.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 0dc4de2fa9f6..318bd00bf94f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -45,6 +45,7 @@
#define SDIO_FUNC2_BLOCKSIZE 512
#define SDIO_4373_FUNC2_BLOCKSIZE 256
#define SDIO_435X_FUNC2_BLOCKSIZE 256
+#define SDIO_4329_FUNC2_BLOCKSIZE 128
/* Maximum milliseconds to wait for F2 to come up */
#define SDIO_WAIT_F2RDY 3000

@@ -920,6 +921,9 @@ int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
case SDIO_DEVICE_ID_BROADCOM_4356:
f2_blksz = SDIO_435X_FUNC2_BLOCKSIZE;
break;
+ case SDIO_DEVICE_ID_BROADCOM_4329:
+ f2_blksz = SDIO_4329_FUNC2_BLOCKSIZE;
+ break;
default:
break;
}
--
2.27.0
\
 
 \ /
  Last update: 2020-08-30 21:18    [W:0.054 / U:2.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site