lkml.org 
[lkml]   [2020]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/6] leds: Add driver for Acer Iconia Tab A500
Date
Acer Iconia Tab A500 is an Android tablet device which has two LEDs
embedded into the Power Button. Orange LED indicates "battery charging"
status and white LED indicates "wake-up/charge-done" status. The new LED
driver provides control over both LEDs to userspace.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/leds/Kconfig | 7 ++
drivers/leds/Makefile | 1 +
drivers/leds/leds-acer-a500.c | 130 ++++++++++++++++++++++++++++++++++
3 files changed, 138 insertions(+)
create mode 100644 drivers/leds/leds-acer-a500.c

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 4f6464a169d5..4c39b53bcf1f 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -921,6 +921,13 @@ config LEDS_SGM3140
This option enables support for the SGM3140 500mA Buck/Boost Charge
Pump LED Driver.

+config LEDS_ACER_A500
+ tristate "Power button LED support for Acer Iconia Tab A500"
+ depends on LEDS_CLASS && MFD_ACER_A500_EC
+ help
+ This option enables support for the Power Button LED of
+ Acer Iconia Tab A500.
+
comment "LED Triggers"
source "drivers/leds/trigger/Kconfig"

diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 778cb4bb8c52..73e603e1727e 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers (keep this sorted, M-| sort)
obj-$(CONFIG_LEDS_88PM860X) += leds-88pm860x.o
obj-$(CONFIG_LEDS_AAT1290) += leds-aat1290.o
+obj-$(CONFIG_LEDS_ACER_A500) += leds-acer-a500.o
obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
obj-$(CONFIG_LEDS_AN30259A) += leds-an30259a.o
obj-$(CONFIG_LEDS_APU) += leds-apu.o
diff --git a/drivers/leds/leds-acer-a500.c b/drivers/leds/leds-acer-a500.c
new file mode 100644
index 000000000000..790238cebfb5
--- /dev/null
+++ b/drivers/leds/leds-acer-a500.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define A500_EC_LED_DELAY_USEC (100 * 1000)
+
+enum {
+ REG_RESET_LEDS = 0x40,
+ REG_POWER_LED_ON = 0x42,
+ REG_CHARGE_LED_ON = 0x43,
+ REG_ANDROID_LEDS_OFF = 0x5a,
+};
+
+struct a500_ec_led {
+ struct led_classdev cdev;
+ struct a500_ec_led *other;
+ const struct reg_sequence *enable_seq;
+ struct regmap *rmap;
+};
+
+static const struct reg_sequence a500_ec_leds_reset_seq[] = {
+ REG_SEQ(REG_RESET_LEDS, 0x0, A500_EC_LED_DELAY_USEC),
+ REG_SEQ(REG_ANDROID_LEDS_OFF, 0x0, A500_EC_LED_DELAY_USEC),
+};
+
+static const struct reg_sequence a500_ec_white_led_enable_seq[] = {
+ REG_SEQ(REG_POWER_LED_ON, 0x0, A500_EC_LED_DELAY_USEC),
+};
+
+static const struct reg_sequence a500_ec_orange_led_enable_seq[] = {
+ REG_SEQ(REG_CHARGE_LED_ON, 0x0, A500_EC_LED_DELAY_USEC),
+};
+
+static int a500_ec_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct a500_ec_led *led = container_of(led_cdev, struct a500_ec_led,
+ cdev);
+ struct reg_sequence control_seq[2];
+ unsigned int num_regs = 1;
+
+ if (value) {
+ control_seq[0] = led->enable_seq[0];
+ } else {
+ /*
+ * There is no separate controls which can disable LEDs
+ * individually, there is only RESET_LEDS command that turns
+ * off both LEDs.
+ *
+ * RESET_LEDS turns off both LEDs, thus restore other LED if
+ * it's turned ON.
+ */
+ if (led->other->cdev.brightness)
+ num_regs = 2;
+
+ control_seq[0] = a500_ec_leds_reset_seq[0];
+ control_seq[1] = led->other->enable_seq[0];
+ }
+
+ return regmap_multi_reg_write(led->rmap, control_seq, num_regs);
+}
+
+static int a500_ec_leds_probe(struct platform_device *pdev)
+{
+ struct a500_ec_led *white_led, *orange_led;
+ struct regmap *rmap;
+ int err;
+
+ rmap = dev_get_regmap(pdev->dev.parent, "KB930");
+ if (!rmap)
+ return -EINVAL;
+
+ /* reset and turn off LEDs */
+ regmap_multi_reg_write(rmap, a500_ec_leds_reset_seq, 2);
+
+ white_led = devm_kzalloc(&pdev->dev, sizeof(*white_led), GFP_KERNEL);
+ if (!white_led)
+ return -ENOMEM;
+
+ white_led->cdev.name = "power:white";
+ white_led->cdev.brightness_set_blocking = a500_ec_led_brightness_set;
+ white_led->cdev.flags = LED_CORE_SUSPENDRESUME;
+ white_led->cdev.max_brightness = 1;
+ white_led->enable_seq = a500_ec_white_led_enable_seq;
+ white_led->rmap = rmap;
+
+ orange_led = devm_kzalloc(&pdev->dev, sizeof(*orange_led), GFP_KERNEL);
+ if (!orange_led)
+ return -ENOMEM;
+
+ orange_led->cdev.name = "power:orange";
+ orange_led->cdev.brightness_set_blocking = a500_ec_led_brightness_set;
+ orange_led->cdev.flags = LED_CORE_SUSPENDRESUME;
+ orange_led->cdev.max_brightness = 1;
+ orange_led->enable_seq = a500_ec_orange_led_enable_seq;
+ orange_led->rmap = rmap;
+
+ white_led->other = orange_led;
+ orange_led->other = white_led;
+
+ err = devm_led_classdev_register(&pdev->dev, &white_led->cdev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register white LED\n");
+ return err;
+ }
+
+ err = devm_led_classdev_register(&pdev->dev, &orange_led->cdev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to register orange LED\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static struct platform_driver a500_ec_leds_driver = {
+ .driver = {
+ .name = "acer-a500-iconia-leds",
+ },
+ .probe = a500_ec_leds_probe,
+};
+module_platform_driver(a500_ec_leds_driver);
+
+MODULE_DESCRIPTION("LED driver for Acer Iconia Tab A500 Power Button");
+MODULE_AUTHOR("Dmitry Osipenko <digetx@gmail.com>");
+MODULE_ALIAS("platform:acer-a500-iconia-leds");
+MODULE_LICENSE("GPL");
--
2.27.0
\
 
 \ /
  Last update: 2020-08-30 20:56    [W:0.149 / U:3.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site