lkml.org 
[lkml]   [2020]   [Aug]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/10] dt-bindings: watchdog: sp-805: Convert to Json-schema
Date
Convert the ARM SP-805 watchdog IP DT binding over to Json-schema.

A straight-forward conversion, but the requirement for providing two
clocks got strengthened from "should" to "must".

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
.../bindings/watchdog/arm,sp805.txt | 32 --------
.../bindings/watchdog/arm,sp805.yaml | 75 +++++++++++++++++++
2 files changed, 75 insertions(+), 32 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.txt
create mode 100644 Documentation/devicetree/bindings/watchdog/arm,sp805.yaml

diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt b/Documentation/devicetree/bindings/watchdog/arm,sp805.txt
deleted file mode 100644
index bee6f1f0e41b..000000000000
--- a/Documentation/devicetree/bindings/watchdog/arm,sp805.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-ARM AMBA Primecell SP805 Watchdog
-
-SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that
-can be used to identify the peripheral type, vendor, and revision.
-This value can be used for driver matching.
-
-As SP805 WDT is a primecell IP, it follows the base bindings specified in
-'arm/primecell.txt'
-
-Required properties:
-- compatible: Should be "arm,sp805" & "arm,primecell"
-- reg: Should contain location and length for watchdog timer register
-- clocks: Clocks driving the watchdog timer hardware. This list should be
- 2 clocks. With 2 clocks, the order is wdog_clk, apb_pclk
- wdog_clk can be equal to or be a sub-multiple of the apb_pclk
- frequency
-- clock-names: Shall be "wdog_clk" for first clock and "apb_pclk" for the
- second one
-
-Optional properties:
-- interrupts: Should specify WDT interrupt number
-- timeout-sec: Should specify default WDT timeout in seconds. If unset, the
- default timeout is determined by the driver
-
-Example:
- watchdog@66090000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0x66090000 0x1000>;
- interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&wdt_clk>, <&apb_pclk>;
- clock-names = "wdog_clk", "apb_pclk";
- };
diff --git a/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
new file mode 100644
index 000000000000..980e155d3387
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/arm,sp805.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM AMBA Primecell SP805 Watchdog
+
+maintainers:
+ - Viresh Kumar <vireshk@kernel.org>
+
+description: |+
+ The Arm SP805 IP implements a watchdog device, which triggers an interrupt
+ after a configurable time period. If that interrupt has not been serviced
+ when the next interrupt would be triggered, the reset signal is asserted.
+
+allOf:
+ - $ref: /schemas/arm/primecell.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+ properties:
+ compatible:
+ contains:
+ const: arm,sp805
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: arm,sp805
+ - const: arm,primecell
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: |
+ Clocks driving the watchdog timer hardware. The first clock is used
+ for the actual watchdog counter. The second clock drives the register
+ interface.
+ minItems: 2
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: wdog_clk
+ - const: apb_pclk
+
+ timeout-sec:
+ description: |
+ Should specify default WDT timeout in seconds. If unset, the default
+ timeout is determined by the driver.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ watchdog@66090000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x66090000 0x1000>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&wdt_clk>, <&apb_pclk>;
+ clock-names = "wdog_clk", "apb_pclk";
+ };
--
2.17.1
\
 
 \ /
  Last update: 2020-08-28 15:09    [W:0.209 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site