lkml.org 
[lkml]   [2020]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 07/27] Input: bu21013_ts - Simplify with dev_err_probe()
On Thu, Aug 27, 2020 at 9:59 PM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> Common pattern of handling deferred probe can be simplified with
> dev_err_probe(). Less code and also it prints the error value.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
>
> ---
>
> Changes since v1:
> 1. Remove unneeded PTR_ERR_OR_ZERO, as pointed by Andy.
> ---
> drivers/input/touchscreen/bu21013_ts.c | 17 ++++++-----------
> 1 file changed, 6 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
> index 2f1f0d7607f8..86bd38243d6c 100644
> --- a/drivers/input/touchscreen/bu21013_ts.c
> +++ b/drivers/input/touchscreen/bu21013_ts.c
> @@ -496,12 +496,10 @@ static int bu21013_probe(struct i2c_client *client,
>
> /* Named "CS" on the chip, DT binding is "reset" */
> ts->cs_gpiod = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
> - error = PTR_ERR_OR_ZERO(ts->cs_gpiod);
> - if (error) {
> - if (error != -EPROBE_DEFER)
> - dev_err(&client->dev, "failed to get CS GPIO\n");
> - return error;
> - }
> + if (IS_ERR(ts->cs_gpiod))
> + return dev_err_probe(&client->dev, PTR_ERR(ts->cs_gpiod),
> + "failed to get CS GPIO\n");
> +
> gpiod_set_consumer_name(ts->cs_gpiod, "BU21013 CS");
>
> error = devm_add_action_or_reset(&client->dev,
> @@ -516,11 +514,8 @@ static int bu21013_probe(struct i2c_client *client,
> ts->int_gpiod = devm_gpiod_get_optional(&client->dev,
> "touch", GPIOD_IN);
> error = PTR_ERR_OR_ZERO(ts->int_gpiod);
> - if (error) {
> - if (error != -EPROBE_DEFER)
> - dev_err(&client->dev, "failed to get INT GPIO\n");
> - return error;
> - }
> + if (error)
> + return dev_err_probe(&client->dev, error, "failed to get INT GPIO\n");
>
> if (ts->int_gpiod)
> gpiod_set_consumer_name(ts->int_gpiod, "BU21013 INT");
> --
> 2.17.1
>


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2020-08-27 21:41    [W:0.240 / U:9.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site