lkml.org 
[lkml]   [2020]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 26/27] Input: bu21013_ts - Use local 'client->dev' variable in probe()
Date
'dev' is shorter and simpler than '&client->dev' and in few cases it
allows to skip line wrapping. Probe function uses '&client->dev' a lot,
so this improves readability slightly.

Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v2:
1. New patch
---
drivers/input/touchscreen/bu21013_ts.c | 61 ++++++++++++--------------
1 file changed, 28 insertions(+), 33 deletions(-)

diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
index 86bd38243d6c..f09204091ba5 100644
--- a/drivers/input/touchscreen/bu21013_ts.c
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -411,31 +411,32 @@ static int bu21013_probe(struct i2c_client *client,
struct input_dev *in_dev;
struct input_absinfo *info;
u32 max_x = 0, max_y = 0;
+ struct device *dev = &client->dev;
int error;

if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA)) {
- dev_err(&client->dev, "i2c smbus byte data not supported\n");
+ dev_err(dev, "i2c smbus byte data not supported\n");
return -EIO;
}

if (!client->irq) {
- dev_err(&client->dev, "No IRQ set up\n");
+ dev_err(dev, "No IRQ set up\n");
return -EINVAL;
}

- ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
+ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
if (!ts)
return -ENOMEM;

ts->client = client;

- ts->x_flip = device_property_read_bool(&client->dev, "rohm,flip-x");
- ts->y_flip = device_property_read_bool(&client->dev, "rohm,flip-y");
+ ts->x_flip = device_property_read_bool(dev, "rohm,flip-x");
+ ts->y_flip = device_property_read_bool(dev, "rohm,flip-y");

- in_dev = devm_input_allocate_device(&client->dev);
+ in_dev = devm_input_allocate_device(dev);
if (!in_dev) {
- dev_err(&client->dev, "device memory alloc failed\n");
+ dev_err(dev, "device memory alloc failed\n");
return -ENOMEM;
}
ts->in_dev = in_dev;
@@ -445,8 +446,8 @@ static int bu21013_probe(struct i2c_client *client,
in_dev->name = DRIVER_TP;
in_dev->id.bustype = BUS_I2C;

- device_property_read_u32(&client->dev, "rohm,touch-max-x", &max_x);
- device_property_read_u32(&client->dev, "rohm,touch-max-y", &max_y);
+ device_property_read_u32(dev, "rohm,touch-max-x", &max_x);
+ device_property_read_u32(dev, "rohm,touch-max-y", &max_y);

input_set_abs_params(in_dev, ABS_MT_POSITION_X, 0, max_x, 0, 0);
input_set_abs_params(in_dev, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
@@ -455,14 +456,14 @@ static int bu21013_probe(struct i2c_client *client,

/* Adjust for the legacy "flip" properties, if present */
if (!ts->props.invert_x &&
- device_property_read_bool(&client->dev, "rohm,flip-x")) {
+ device_property_read_bool(dev, "rohm,flip-x")) {
info = &in_dev->absinfo[ABS_MT_POSITION_X];
info->maximum -= info->minimum;
info->minimum = 0;
}

if (!ts->props.invert_y &&
- device_property_read_bool(&client->dev, "rohm,flip-y")) {
+ device_property_read_bool(dev, "rohm,flip-y")) {
info = &in_dev->absinfo[ABS_MT_POSITION_Y];
info->maximum -= info->minimum;
info->minimum = 0;
@@ -472,50 +473,46 @@ static int bu21013_probe(struct i2c_client *client,
INPUT_MT_DIRECT | INPUT_MT_TRACK |
INPUT_MT_DROP_UNUSED);
if (error) {
- dev_err(&client->dev, "failed to initialize MT slots");
+ dev_err(dev, "failed to initialize MT slots");
return error;
}

- ts->regulator = devm_regulator_get(&client->dev, "avdd");
+ ts->regulator = devm_regulator_get(dev, "avdd");
if (IS_ERR(ts->regulator)) {
- dev_err(&client->dev, "regulator_get failed\n");
+ dev_err(dev, "regulator_get failed\n");
return PTR_ERR(ts->regulator);
}

error = regulator_enable(ts->regulator);
if (error) {
- dev_err(&client->dev, "regulator enable failed\n");
+ dev_err(dev, "regulator enable failed\n");
return error;
}

- error = devm_add_action_or_reset(&client->dev, bu21013_power_off, ts);
+ error = devm_add_action_or_reset(dev, bu21013_power_off, ts);
if (error) {
- dev_err(&client->dev, "failed to install power off handler\n");
+ dev_err(dev, "failed to install power off handler\n");
return error;
}

/* Named "CS" on the chip, DT binding is "reset" */
- ts->cs_gpiod = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_HIGH);
+ ts->cs_gpiod = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(ts->cs_gpiod))
- return dev_err_probe(&client->dev, PTR_ERR(ts->cs_gpiod),
- "failed to get CS GPIO\n");
+ return dev_err_probe(dev, PTR_ERR(ts->cs_gpiod), "failed to get CS GPIO\n");

gpiod_set_consumer_name(ts->cs_gpiod, "BU21013 CS");

- error = devm_add_action_or_reset(&client->dev,
- bu21013_disable_chip, ts);
+ error = devm_add_action_or_reset(dev, bu21013_disable_chip, ts);
if (error) {
- dev_err(&client->dev,
- "failed to install chip disable handler\n");
+ dev_err(dev, "failed to install chip disable handler\n");
return error;
}

/* Named "INT" on the chip, DT binding is "touch" */
- ts->int_gpiod = devm_gpiod_get_optional(&client->dev,
- "touch", GPIOD_IN);
+ ts->int_gpiod = devm_gpiod_get_optional(dev, "touch", GPIOD_IN);
error = PTR_ERR_OR_ZERO(ts->int_gpiod);
if (error)
- return dev_err_probe(&client->dev, error, "failed to get INT GPIO\n");
+ return dev_err_probe(dev, error, "failed to get INT GPIO\n");

if (ts->int_gpiod)
gpiod_set_consumer_name(ts->int_gpiod, "BU21013 INT");
@@ -523,22 +520,20 @@ static int bu21013_probe(struct i2c_client *client,
/* configure the touch panel controller */
error = bu21013_init_chip(ts);
if (error) {
- dev_err(&client->dev, "error in bu21013 config\n");
+ dev_err(dev, "error in bu21013 config\n");
return error;
}

- error = devm_request_threaded_irq(&client->dev, client->irq,
- NULL, bu21013_gpio_irq,
+ error = devm_request_threaded_irq(dev, client->irq, NULL, bu21013_gpio_irq,
IRQF_ONESHOT, DRIVER_TP, ts);
if (error) {
- dev_err(&client->dev, "request irq %d failed\n",
- client->irq);
+ dev_err(dev, "request irq %d failed\n", client->irq);
return error;
}

error = input_register_device(in_dev);
if (error) {
- dev_err(&client->dev, "failed to register input device\n");
+ dev_err(dev, "failed to register input device\n");
return error;
}

--
2.17.1
\
 
 \ /
  Last update: 2020-08-27 21:00    [W:0.258 / U:9.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site