lkml.org 
[lkml]   [2020]   [Aug]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 19/19] arm64: dts: imx8mq-zii-ultra: Add hog suffixes to GPIO hogs
Date
According to device tree specification, device node names should be
somewhat generic and reflecting the function of the device so add the
"hog" suffixes to all GPIO hog nodes.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 0d1088dcaa02..fa7a041ffcfd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -229,28 +229,28 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio3_hog>;

- usb-emulation {
+ usb-emulation-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "usb-emulation";
};

- usb-mode1 {
+ usb-mode1-hog {
gpio-hog;
gpios = <11 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "usb-mode1";
};

- usb-pwr {
+ usb-pwr-hog {
gpio-hog;
gpios = <12 GPIO_ACTIVE_LOW>;
output-high;
line-name = "usb-pwr-ctrl-en-n";
};

- usb-mode2 {
+ usb-mode2-hog {
gpio-hog;
gpios = <13 GPIO_ACTIVE_HIGH>;
output-high;
--
2.17.1
\
 
 \ /
  Last update: 2020-08-25 21:38    [W:0.131 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site