lkml.org 
[lkml]   [2020]   [Aug]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 4/4] arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster
From
Date


On 8/12/2020 2:34 AM, Sergei Shtylyov wrote:
> Hello!
>
> On 12.08.2020 10:19, Wesley Cheng wrote:
>
>> Add the required DTS node for the USB VBUS output regulator, which is
>> available on PM8150B.  This will provide the VBUS source to connected
>> peripherals.
>>
>> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
>> ---
>>   arch/arm64/boot/dts/qcom/pm8150b.dtsi   | 6 ++++++
>>   arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 4 ++++
>>   2 files changed, 10 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
>> b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
>> index 053c659734a7..9e560c1ca30d 100644
>> --- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
>> @@ -53,6 +53,12 @@ power-on@800 {
>>               status = "disabled";
>>           };
>>   +        pm8150b_vbus: dcdc@1100 {
>
>    s/dcdc/regulator/? What is "dcdc", anyway?
>    The device nodes must have the generic names, according to the DT spec.
>

Hi Sergei,

Thanks for the comment!

DCDC is the label that we use for the DC to DC converter block, since
the VBUS booster will output 5V to the connected devices. Would it make
more sense to have "dc-dc?"

Thanks
Wesley

>> +            compatible = "qcom,pm8150b-vbus-reg";
>> +            status = "disabled";
>> +            reg = <0x1100>;
>> +        };
>> +
>>           pm8150b_typec: typec@1500 {
>>               compatible = "qcom,pm8150b-usb-typec";
>>               status = "disabled";
> [...]
>
> MBR, Sergei

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2020-08-20 09:50    [W:0.183 / U:1.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site