lkml.org 
[lkml]   [2020]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4] perf test: Introduce script for Arm CoreSight testing
Hi Suzuki,

On Wed, Aug 12, 2020 at 05:59:55PM +0100, Suzuki Kuruppassery Poulose wrote:
> Hi Leo,
>
> On 08/06/2020 08:02 AM, Leo Yan wrote:
> > We need a simple method to test Perf with Arm CoreSight drivers, this
> > could be used for smoke testing when new patch is coming for perf or
> > CoreSight drivers, and we also can use the test to confirm if the
> > CoreSight has been enabled successfully on new platforms.
> >
> > This patch introduces the shell script test_arm_coresight.sh which is
> > under the 'pert test' framework. This script provides three testing
> > scenarios:
>
> Thank you for this testcase. It is a very good tool for people
> check their system for CoreSight driver functionality.

My pleasure! This patch is except for ourselves testing, one main
purpose is to integrate Perf testing with LKFT [1] for Arm related
PMU events.

[1] https://lkft.linaro.org/tests/

> > Test scenario 1: traverse all possible paths between source and sink
> >
> > For traversing possible paths, simply to say, the testing rationale
> > is source oriented testing, it traverses every source (now only refers
> > to ETM device) and test its all possible sinks. To search the complete
> > paths from one specific source to its sinks, this patch relies on the
> > sysfs '/sys/bus/coresight/devices/devX/out:Y' for depth-first search
> > (DFS) for iteration connected device nodes, if the output device is
> > detected as one of ETR, ETF, or ETB types then it will test trace data
>
> Please see my suggestion below, to use "enable_sink" as an indicator
> for a sink device.
>
> > recording and decoding for this PMU device.
> >
> > The script runs three output testings for every trace data:
> > - Test branch samples dumping with 'perf script' command;
> > - Test branch samples reporting with 'perf report' command;
> > - Use option '--itrace=i1000i' to insert synthesized instructions events
> > and the script will check if perf can output the percentage value
> > successfully based on the instruction samples.
> >
> > Test scenario 2: CPU wide mode test
> > > For CPU wide mode testing, it passes option '-a' to perf tool to enable
> > tracing on all CPUs, so it's hard to say which program will be traced.
>
> Isn't this system-wide, when you trace all CPUs ? In CPU wide mode,
> you specify a list of CPUs (-C ?). I always get confused here.

Agree, it is system-wide tracing. Will fix.

> > But perf tool itself contributes much overload in this case, so it will
> > parse trace data and check if process 'perf' can be detected or not.
> >
> > diff --git a/tools/perf/tests/shell/test_arm_coresight.sh b/tools/perf/tests/shell/test_arm_coresight.sh
> > new file mode 100755
> > index 000000000000..73b973bada26
> > --- /dev/null
> > +++ b/tools/perf/tests/shell/test_arm_coresight.sh
> > @@ -0,0 +1,172 @@
> > +#!/bin/sh
> > +# Check Arm CoreSight trace data recording and branch samples
> > +
> > +# Uses the 'perf record' to record trace data with Arm CoreSight sinks;
> > +# then verify if there have any branch samples and instruction samples
> > +# are generated by CoreSight with 'perf script' and 'perf report'
> > +# commands.
> > +
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Leo Yan <leo.yan@linaro.org>, 2020
> > +
> > +perfdata=$(mktemp /tmp/__perf_test.perf.data.XXXXX)
> > +file=$(mktemp /tmp/temporary_file.XXXXX)
> > +
> > +skip_if_no_cs_etm_event() {
> > + perf list | grep -q 'cs_etm//' && return 0
> > +
> > + # cs_etm event doesn't exist
> > + return 2
> > +}
> > +
> > +skip_if_no_cs_etm_event || exit 2
> > +
> > +record_touch_file() {
> > + echo "Recording trace (only user mode) with path: CPU$2 => $1"
> > + perf record -o ${perfdata} -e cs_etm/@$1/u --per-thread \
> > + -- taskset -c $2 touch $file
> > +}
> > +
> > +perf_script_branch_samples() {
> > + echo "Looking at perf.data file for dumping branch samples:"
> > +
> > + # Below is an example of the branch samples dumping:
> > + # touch 6512 1 branches:u: ffffb220824c strcmp+0xc (/lib/aarch64-linux-gnu/ld-2.27.so)
> > + # touch 6512 1 branches:u: ffffb22082e0 strcmp+0xa0 (/lib/aarch64-linux-gnu/ld-2.27.so)
> > + # touch 6512 1 branches:u: ffffb2208320 strcmp+0xe0 (/lib/aarch64-linux-gnu/ld-2.27.so)
> > + perf script -F,-time -i ${perfdata} | \
> > + egrep " +$1 +[0-9]+ .* +branches:([u|k]:)? +"
> > +}
> > +
> > +perf_report_branch_samples() {
> > + echo "Looking at perf.data file for reporting branch samples:"
> > +
> > + # Below is an example of the branch samples reporting:
> > + # 73.04% 73.04% touch libc-2.27.so [.] _dl_addr
> > + # 7.71% 7.71% touch libc-2.27.so [.] getenv
> > + # 2.59% 2.59% touch ld-2.27.so [.] strcmp
> > + perf report --stdio -i ${perfdata} | \
> > + egrep " +[0-9]+\.[0-9]+% +[0-9]+\.[0-9]+% +$1 "
> > +}
> > +
> > +perf_report_instruction_samples() {
> > + echo "Looking at perf.data file for instruction samples:"
> > +
> > + # Below is an example of the instruction samples reporting:
> > + # 68.12% touch libc-2.27.so [.] _dl_addr
> > + # 5.80% touch libc-2.27.so [.] getenv
> > + # 4.35% touch ld-2.27.so [.] _dl_fixup
> > + perf report --itrace=i1000i --stdio -i ${perfdata} | \
> > + egrep " +[0-9]+\.[0-9]+% +$1"
> > +}
> > +
> > +arm_cs_iterate_devices() {
> > + for dev in $1/connections/out\:*; do
> > +
> > + # Skip testing if it's not a directory
> > + ! [ -d $dev ] && continue;
> > +
> > + # Read out its symbol link file name
> > + path=`readlink -f $dev`
> > +
> > + # Extract device name from path, e.g.
> > + # path = '/sys/devices/platform/20010000.etf/tmc_etf0'
> > + # `> device_name = 'tmc_etf0'
> > + device_name=`echo $path | awk -F/ '{print $(NF)}'`
> > +
> > + echo $device_name | egrep -q "etr|etb|etf"
>
> Could we check for the existence of "enable_sink" instead, for detecting
> if this is a sink device ? That way, we are covered for future cases of
> a new sink type, and is more reliable.

Good suggestion, will fix.

> > +
> > + # Only test if the output device is ETR/ETB/ETF
> > + if [ $? -eq 0 ]; then
> > +
> > + pmu_dev="/sys/bus/event_source/devices/cs_etm/sinks/$device_name"
> > +
> > + # Exit if PMU device node doesn't exist
> > + if ! [ -f $pmu_dev ]; then
> > + echo "PMU device $pmu_dev doesn't exist"
>
> Misleading output. $pmu_dev is not a PMU device. Instead, it is one of
> the supported sinks by the PMU.

Will fix.

> > + exit 1
> > + fi
> > +
> > + record_touch_file $device_name $2 &&
> > + perf_script_branch_samples touch &&
> > + perf_report_branch_samples touch &&
> > + perf_report_instruction_samples touch
> > +
> > + err=$?
> > +
> > + # Exit when find failure
> > + [ $err != 0 ] && exit $err
> > +
> > + rm -f ${perfdata}
> > + rm -f ${file}
> > + fi
> > +
> > + arm_cs_iterate_devices $dev $2
> > + done
> > +}
> > +
> > +arm_cs_etm_traverse_path_test() {
> > + # Iterate for every ETM device
> > + for dev in /sys/bus/coresight/devices/etm*; do
> > +
> > + # Find the ETM device belonging to which CPU
> > + cpu=`cat $dev/cpu`
> > +
> > + echo $dev
> > + echo $cpu
> > +
> > + # Use depth-first search (DFS) to iterate outputs
> > + arm_cs_iterate_devices $dev $cpu
> > + done
> > +}
> > +
> > +arm_cs_etm_cpu_wide_test() {
> > + echo "Recording trace with CPU wide mode"
> > + perf record -o ${perfdata} -e cs_etm// -a -- ls
> > +
> > + perf_script_branch_samples perf &&
> > + perf_report_branch_samples perf &&
> > + perf_report_instruction_samples perf
> > +
> > + err=$?
> > +
> > + # Exit when find failure
> > + [ $err != 0 ] && exit $err
> > +
> > + rm -f ${perfdata}
> > + rm -f ${file}
> > +}
> > +
> > +arm_cs_etm_snapshot_test() {
> > + echo "Recording trace with snapshot mode"
> > + perf record -o ${perfdata} -e cs_etm// -S --per-thread \
> > + -- dd if=/dev/zero of=/dev/null &
>
> As far as I understand, --per-thread option is not needed anymore
> for normal tracing (irrespective of whether your application is
> multi-threaded or not)

I noted before you had some discussion with Mathieu for AUX buffer :)
will remove --per-thread option.

> > + PERFPID=$!
> > +
> > + # Wait for perf program
> > + sleep 1
> > +
> > + # Send signal to snapshot trace data
> > + kill -USR2 $PERFPID
> > +
> > + # Stop perf program
> > + kill $PERFPID
> > + wait $PERFPID
> > +
> > + perf_script_branch_samples dd &&
> > + perf_report_branch_samples dd &&
> > + perf_report_instruction_samples dd
> > +
> > + err=$?
> > +
> > + # Exit when find failure
> > + [ $err != 0 ] && exit $err
> > +
> > + rm -f ${perfdata}
> > + rm -f ${file}
> > +}
> > +
> > +arm_cs_etm_traverse_path_test
> > +arm_cs_etm_cpu_wide_test
> > +arm_cs_etm_snapshot_test
> > +exit 0
> >
>
>
> Rest looks OK to me.

Thanks a lot for your reviewing.

Leo

\
 
 \ /
  Last update: 2020-08-13 02:12    [W:0.038 / U:1.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site